This is XeTeX, Version 3.1415926-2.2-0.9995.1 (MiKTeX 2.8) (preloaded format=xelatex 2015.5.10) 1 FEB 2016 12:25 entering extended mode **maindoc.tex ("C:\Users\Sareh\Desktop\najme thesis\maindoc.tex" LaTeX2e <2009/09/24> Babel and hyphenation patterns for english, dumylang, nohyphenation, ge rman, ngerman, german-x-2009-06-19, ngerman-x-2009-06-19, french, loaded. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\base\report.cls" Document Class: report 2007/10/19 v1.4h Standard LaTeX document class ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\base\size11.clo" File: size11.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count80 \c@chapter=\count81 \c@section=\count82 \c@subsection=\count83 \c@subsubsection=\count84 \c@paragraph=\count85 \c@subparagraph=\count86 \c@figure=\count87 \c@table=\count88 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\graphics\graphicx.sty" Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\graphics\keyval.sty" Package: keyval 1999/03/16 v1.13 key=value parser (DPC) \KV@toks@=\toks14 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\graphics\graphics.sty" Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\graphics\trig.sty" Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\00miktex\graphics.cfg" File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive ) Package graphics Info: Driver file: xetex.def on input line 91. ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xetex-def\xetex.def" File: xetex.def 2009/11/22 v0.94 LaTeX color/graphics driver for XeTeX (RRM/JK) )) \Gin@req@height=\dimen103 \Gin@req@width=\dimen104 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\subfigure\subfigure.sty" Package: subfigure 2002/07/30 v2.1.4 subfigure package \subfigtopskip=\skip43 \subfigcapskip=\skip44 \subfigcaptopadj=\dimen105 \subfigbottomskip=\skip45 \subfigcapmargin=\dimen106 \subfiglabelskip=\skip46 \c@subfigure=\count89 \c@lofdepth=\count90 \c@subtable=\count91 \c@lotdepth=\count92 **************************************** * Local config file subfigure.cfg used * **************************************** ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\subfigure\subfigure.cfg") \subfig@top=\skip47 \subfig@bottom=\skip48 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\jknappen\mathrsfs.sty" Package: mathrsfs 1996/01/01 Math RSFS package v1.0 (jk) \symrsfs=\mathgroup4 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\caption\caption.sty" Package: caption 2010/01/09 v3.1m Customizing captions (AR) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\caption\caption3.sty" Package: caption3 2010/01/14 v3.1m caption3 kernel (AR) \captionmargin=\dimen107 \captionmargin@=\dimen108 \captionwidth=\dimen109 \caption@indent=\dimen110 \caption@parindent=\dimen111 \caption@hangindent=\dimen112 ) \c@ContinuedFloat=\count93 Package caption Info: subfigure package is loaded. ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\hyperref\hyperref.sty" Package: hyperref 2010/09/17 v6.81q Hypertext links for LaTeX ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\ltxcmds.sty" Package: ltxcmds 2010/04/26 v1.7 LaTeX kernel commands for general use (HO) ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\infwarerr.sty" Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO) ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\kvsetkeys.sty" Package: kvsetkeys 2010/03/01 v1.9 Key value parser (HO) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\etexcmds.sty" Package: etexcmds 2010/01/28 v1.3 Prefix for e-TeX command names (HO) Package etexcmds Info: Could not find \expanded. (etexcmds) That can mean that you are not using pdfTeX 1.50 or (etexcmds) that some package has redefined \expanded. (etexcmds) In the latter case, load this package earlier. )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\pdfescape.sty" Package: pdfescape 2010/03/01 v1.9 Provides hex, PDF name and string conversion s (HO) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\pdftexcmds.sty" Package: pdftexcmds 2010/04/01 v0.9 Utility functions of pdfTeX for LuaTeX (HO) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\ifluatex.sty" Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX not detected. ) Package pdftexcmds Info: LuaTeX not detected. Package pdftexcmds Info: pdfTeX >= 1.30 not detected. Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\ifpdf.sty" Package: ifpdf 2010/01/28 v2.1 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in pdf mode not detected. ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\ifvtex.sty" Package: ifvtex 2010/03/01 v1.5 Switches for detecting VTeX and its modes (HO) Package ifvtex Info: VTeX not detected. ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\ifxetex\ifxetex.sty" Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\oberdiek\hycolor.sty" Package: hycolor 2009/12/12 v1.6 Color options of hyperref/bookmark (HO) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\oberdiek\xcolor-patch.sty" Package: xcolor-patch 2009/12/12 xcolor patch )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\oberdiek\letltxmacro.sty" Package: letltxmacro 2008/06/24 v1.3 Let assignment for LaTeX macros (HO) ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\oberdiek\kvoptions.sty" Package: kvoptions 2010/02/22 v3.7 Keyval support for LaTeX options (HO) ) \@linkdim=\dimen113 \Hy@linkcounter=\count94 \Hy@pagecounter=\count95 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\hyperref\pd1enc.def" File: pd1enc.def 2010/09/17 v6.81q Hyperref: PDFDocEncoding definition (HO) ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\intcalc.sty" Package: intcalc 2007/09/27 v1.1 Expandable integer calculations (HO) ) \Hy@SavedSpaceFactor=\count96 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\00miktex\hyperref.cfg" File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive ) Package hyperref Info: Option `colorlinks' set `true' on input line 3798. Package hyperref Info: Hyper figures OFF on input line 3902. Package hyperref Info: Link nesting OFF on input line 3907. Package hyperref Info: Hyper index ON on input line 3910. Package hyperref Info: Plain pages OFF on input line 3917. Package hyperref Info: Backreferencing OFF on input line 3922. Package hyperref Info: Implicit mode ON; LaTeX internals redefined. Package hyperref Info: Bookmarks ON on input line 4132. \c@Hy@tempcnt=\count97 ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xetexurl\url.sty" \Urlmuskip=\muskip10 Package: url 2004/03/15 ver 3.1 Verb mode for urls, etc. ) LaTeX Info: Redefining \url on input line 4487. ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\bitset.sty" Package: bitset 2007/09/28 v1.0 Data type bit set (HO) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\bigintcalc.sty" Package: bigintcalc 2007/11/11 v1.1 Expandable big integer calculations (HO) )) \Fld@menulength=\count98 \Field@Width=\dimen114 \Fld@charsize=\dimen115 Package hyperref Info: Hyper figures OFF on input line 5526. Package hyperref Info: Link nesting OFF on input line 5531. Package hyperref Info: Hyper index ON on input line 5534. Package hyperref Info: backreferencing OFF on input line 5541. Package hyperref Info: Link coloring ON on input line 5544. Package hyperref Info: Link coloring with OCG OFF on input line 5551. Package hyperref Info: PDF/A mode OFF on input line 5556. LaTeX Info: Redefining \ref on input line 5596. LaTeX Info: Redefining \pageref on input line 5600. ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\atbegshi.sty" Package: atbegshi 2010/03/25 v1.12 At begin shipout hook (HO) ) \Hy@abspage=\count99 \c@Item=\count100 \c@Hfootnote=\count101 ) Package hyperref Message: Driver (autodetected): hxetex. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\hyperref\hxetex.def" File: hxetex.def 2010/09/17 v6.81q Hyperref driver for XeTeX ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\hyperref\puenc.def" File: puenc.def 2010/09/17 v6.81q Hyperref: PDF Unicode definition (HO) ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\stringenc.sty" Package: stringenc 2010/03/01 v1.8 Converts strings between encodings (HO) ) \pdfm@box=\box26 \c@Hy@AnnotLevel=\count102 \HyField@AnnotCount=\count103 \Fld@listcount=\count104 \c@bookmark@seq@number=\count105 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\oberdiek\rerunfilecheck.sty" Package: rerunfilecheck 2010/03/16 v1.6 Rerun checks for auxiliary files (HO) Package rerunfilecheck Info: Feature \pdfmdfivesum is not available (rerunfilecheck) (e.g. pdfTeX or LuaTeX with package `pdftexcmds'). (rerunfilecheck) Therefore file contents cannot be checked efficien tly (rerunfilecheck) and the loading of the package is aborted. ) \Hy@SectionHShift=\skip49 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\amstex\base\amssym.tex" ("C:\Program Files (x86)\MiKTeX 2.8\tex\amstex\base\amssym.def" \msafam=\mathgroup5 \msbfam=\mathgroup6 \eufmfam=\mathgroup7 )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\ams\classes\amsthm.sty" Package: amsthm 2004/08/06 v2.20 \thm@style=\toks15 \thm@bodyfont=\toks16 \thm@headfont=\toks17 \thm@notefont=\toks18 \thm@headpunct=\toks19 \thm@preskip=\skip50 \thm@postskip=\skip51 \thm@headsep=\skip52 \dth@everypar=\toks20 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\ams\math\amsmath.sty" Package: amsmath 2000/07/18 v2.13 AMS math features \@mathmargin=\skip53 For additional information on amsmath, use the `?' option. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\ams\math\amstext.sty" Package: amstext 2000/06/29 v2.01 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\ams\math\amsgen.sty" File: amsgen.sty 1999/11/30 v2.0 \@emptytoks=\toks21 \ex@=\dimen116 )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\ams\math\amsbsy.sty" Package: amsbsy 1999/11/29 v1.2d \pmbraise@=\dimen117 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\ams\math\amsopn.sty" Package: amsopn 1999/12/14 v2.01 operator names ) \inf@bad=\count106 LaTeX Info: Redefining \frac on input line 211. \uproot@=\count107 \leftroot@=\count108 ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.305 }{} You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. LaTeX Info: Redefining \overline on input line 307. \classnum@=\count109 \DOTSCASE@=\count110 LaTeX Info: Redefining \ldots on input line 379. LaTeX Info: Redefining \dots on input line 382. LaTeX Info: Redefining \cdots on input line 467. \Mathstrutbox@=\box27 \strutbox@=\box28 \big@size=\dimen118 LaTeX Font Info: Redeclaring font encoding OML on input line 567. LaTeX Font Info: Redeclaring font encoding OMS on input line 568. \macc@depth=\count111 \c@MaxMatrixCols=\count112 \dotsspace@=\muskip11 \c@parentequation=\count113 \dspbrk@lvl=\count114 \tag@help=\toks22 \row@=\count115 \column@=\count116 \maxfields@=\count117 \andhelp@=\toks23 \eqnshift@=\dimen119 \alignsep@=\dimen120 \tagshift@=\dimen121 \tagwidth@=\dimen122 \totwidth@=\dimen123 \lineht@=\dimen124 Overfull \hbox (324.99777pt too wide) in paragraph at lines 305--1071 []\OT1/cmr/m/n/10.95 0 0 01 02 03 04 05 06 07 08 09 0A [] \@envbody=\toks24 \multlinegap=\skip54 \multlinetaggap=\skip55 \mathdisplay@stack=\toks25 LaTeX Info: Redefining \[ on input line 2666. LaTeX Info: Redefining \] on input line 2667. ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\amsfonts\amssymb.sty" Package: amssymb 2009/06/22 v3.00 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\amsfonts\amsfonts.sty" Package: amsfonts 2009/06/22 v3.00 Basic AMSFonts support \symAMSa=\mathgroup8 \symAMSb=\mathgroup9 LaTeX Font Info: Redeclaring math delimiter \ulcorner on input line 64. LaTeX Font Info: Redeclaring math delimiter \urcorner on input line 65. LaTeX Font Info: Redeclaring math delimiter \llcorner on input line 66. LaTeX Font Info: Redeclaring math delimiter \lrcorner on input line 67. LaTeX Font Info: Redeclaring math symbol \dabar@ on input line 76. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.83 ...l{\rightleftharpoons}{\mathrel}{AMSa}{"0A} You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold' (Font) U/euf/m/n --> U/euf/b/n on input line 96. LaTeX Info: Redefining \frak on input line 99. LaTeX Info: Redefining \Bbb on input line 101. LaTeX Font Info: Redeclaring math symbol \square on input line 128. LaTeX Font Info: Redeclaring math symbol \lozenge on input line 129. LaTeX Font Info: Redeclaring math symbol \vartriangleright on input line 130 . LaTeX Font Info: Redeclaring math symbol \vartriangleleft on input line 131. LaTeX Font Info: Redeclaring math symbol \trianglerighteq on input line 132. LaTeX Font Info: Redeclaring math symbol \trianglelefteq on input line 133. LaTeX Font Info: Redeclaring math symbol \rightsquigarrow on input line 134. ) LaTeX Font Info: Redeclaring math symbol \boxdot on input line 39. LaTeX Font Info: Redeclaring math symbol \boxplus on input line 40. LaTeX Font Info: Redeclaring math symbol \boxtimes on input line 41. LaTeX Font Info: Redeclaring math symbol \blacksquare on input line 43. LaTeX Font Info: Redeclaring math symbol \centerdot on input line 44. LaTeX Font Info: Redeclaring math symbol \blacklozenge on input line 46. LaTeX Font Info: Redeclaring math symbol \circlearrowright on input line 47. LaTeX Font Info: Redeclaring math symbol \circlearrowleft on input line 48. LaTeX Font Info: Redeclaring math symbol \leftrightharpoons on input line 51 . LaTeX Font Info: Redeclaring math symbol \boxminus on input line 52. LaTeX Font Info: Redeclaring math symbol \Vdash on input line 53. LaTeX Font Info: Redeclaring math symbol \Vvdash on input line 54. LaTeX Font Info: Redeclaring math symbol \vDash on input line 55. LaTeX Font Info: Redeclaring math symbol \twoheadrightarrow on input line 56 . LaTeX Font Info: Redeclaring math symbol \twoheadleftarrow on input line 57. LaTeX Font Info: Redeclaring math symbol \leftleftarrows on input line 58. LaTeX Font Info: Redeclaring math symbol \rightrightarrows on input line 59. LaTeX Font Info: Redeclaring math symbol \upuparrows on input line 60. LaTeX Font Info: Redeclaring math symbol \downdownarrows on input line 61. LaTeX Font Info: Redeclaring math symbol \upharpoonright on input line 62. LaTeX Font Info: Redeclaring math symbol \downharpoonright on input line 64. LaTeX Font Info: Redeclaring math symbol \upharpoonleft on input line 65. LaTeX Font Info: Redeclaring math symbol \downharpoonleft on input line 66. LaTeX Font Info: Redeclaring math symbol \rightarrowtail on input line 67. LaTeX Font Info: Redeclaring math symbol \leftarrowtail on input line 68. LaTeX Font Info: Redeclaring math symbol \leftrightarrows on input line 69. LaTeX Font Info: Redeclaring math symbol \rightleftarrows on input line 70. LaTeX Font Info: Redeclaring math symbol \Lsh on input line 71. LaTeX Font Info: Redeclaring math symbol \Rsh on input line 72. LaTeX Font Info: Redeclaring math symbol \leftrightsquigarrow on input line 74. LaTeX Font Info: Redeclaring math symbol \looparrowleft on input line 75. LaTeX Font Info: Redeclaring math symbol \looparrowright on input line 76. LaTeX Font Info: Redeclaring math symbol \circeq on input line 77. LaTeX Font Info: Redeclaring math symbol \succsim on input line 78. LaTeX Font Info: Redeclaring math symbol \gtrsim on input line 79. LaTeX Font Info: Redeclaring math symbol \gtrapprox on input line 80. LaTeX Font Info: Redeclaring math symbol \multimap on input line 81. LaTeX Font Info: Redeclaring math symbol \therefore on input line 82. LaTeX Font Info: Redeclaring math symbol \because on input line 83. LaTeX Font Info: Redeclaring math symbol \doteqdot on input line 84. LaTeX Font Info: Redeclaring math symbol \triangleq on input line 86. LaTeX Font Info: Redeclaring math symbol \precsim on input line 87. LaTeX Font Info: Redeclaring math symbol \lesssim on input line 88. LaTeX Font Info: Redeclaring math symbol \lessapprox on input line 89. LaTeX Font Info: Redeclaring math symbol \eqslantless on input line 90. LaTeX Font Info: Redeclaring math symbol \eqslantgtr on input line 91. LaTeX Font Info: Redeclaring math symbol \curlyeqprec on input line 92. LaTeX Font Info: Redeclaring math symbol \curlyeqsucc on input line 93. LaTeX Font Info: Redeclaring math symbol \preccurlyeq on input line 94. LaTeX Font Info: Redeclaring math symbol \leqq on input line 95. LaTeX Font Info: Redeclaring math symbol \leqslant on input line 96. LaTeX Font Info: Redeclaring math symbol \lessgtr on input line 97. LaTeX Font Info: Redeclaring math symbol \backprime on input line 98. LaTeX Font Info: Redeclaring math symbol \risingdotseq on input line 99. LaTeX Font Info: Redeclaring math symbol \fallingdotseq on input line 100. LaTeX Font Info: Redeclaring math symbol \succcurlyeq on input line 101. LaTeX Font Info: Redeclaring math symbol \geqq on input line 102. LaTeX Font Info: Redeclaring math symbol \geqslant on input line 103. LaTeX Font Info: Redeclaring math symbol \gtrless on input line 104. LaTeX Font Info: Redeclaring math symbol \bigstar on input line 112. LaTeX Font Info: Redeclaring math symbol \between on input line 113. LaTeX Font Info: Redeclaring math symbol \blacktriangledown on input line 11 4. LaTeX Font Info: Redeclaring math symbol \blacktriangleright on input line 1 15. LaTeX Font Info: Redeclaring math symbol \blacktriangleleft on input line 11 6. LaTeX Font Info: Redeclaring math symbol \vartriangle on input line 117. LaTeX Font Info: Redeclaring math symbol \blacktriangle on input line 118. LaTeX Font Info: Redeclaring math symbol \triangledown on input line 119. LaTeX Font Info: Redeclaring math symbol \eqcirc on input line 120. LaTeX Font Info: Redeclaring math symbol \lesseqgtr on input line 121. LaTeX Font Info: Redeclaring math symbol \gtreqless on input line 122. LaTeX Font Info: Redeclaring math symbol \lesseqqgtr on input line 123. LaTeX Font Info: Redeclaring math symbol \gtreqqless on input line 124. LaTeX Font Info: Redeclaring math symbol \Rrightarrow on input line 125. LaTeX Font Info: Redeclaring math symbol \Lleftarrow on input line 126. LaTeX Font Info: Redeclaring math symbol \veebar on input line 127. LaTeX Font Info: Redeclaring math symbol \barwedge on input line 128. LaTeX Font Info: Redeclaring math symbol \doublebarwedge on input line 129. LaTeX Font Info: Redeclaring math symbol \measuredangle on input line 132. LaTeX Font Info: Redeclaring math symbol \sphericalangle on input line 133. LaTeX Font Info: Redeclaring math symbol \varpropto on input line 134. LaTeX Font Info: Redeclaring math symbol \smallsmile on input line 135. LaTeX Font Info: Redeclaring math symbol \smallfrown on input line 136. LaTeX Font Info: Redeclaring math symbol \Subset on input line 137. LaTeX Font Info: Redeclaring math symbol \Supset on input line 138. LaTeX Font Info: Redeclaring math symbol \Cup on input line 139. LaTeX Font Info: Redeclaring math symbol \Cap on input line 141. LaTeX Font Info: Redeclaring math symbol \curlywedge on input line 143. LaTeX Font Info: Redeclaring math symbol \curlyvee on input line 144. LaTeX Font Info: Redeclaring math symbol \leftthreetimes on input line 145. LaTeX Font Info: Redeclaring math symbol \rightthreetimes on input line 146. LaTeX Font Info: Redeclaring math symbol \subseteqq on input line 147. LaTeX Font Info: Redeclaring math symbol \supseteqq on input line 148. LaTeX Font Info: Redeclaring math symbol \bumpeq on input line 149. LaTeX Font Info: Redeclaring math symbol \Bumpeq on input line 150. LaTeX Font Info: Redeclaring math symbol \lll on input line 151. LaTeX Font Info: Redeclaring math symbol \ggg on input line 153. LaTeX Font Info: Redeclaring math symbol \circledS on input line 155. LaTeX Font Info: Redeclaring math symbol \pitchfork on input line 156. LaTeX Font Info: Redeclaring math symbol \dotplus on input line 157. LaTeX Font Info: Redeclaring math symbol \backsim on input line 158. LaTeX Font Info: Redeclaring math symbol \backsimeq on input line 159. LaTeX Font Info: Redeclaring math symbol \complement on input line 160. LaTeX Font Info: Redeclaring math symbol \intercal on input line 161. LaTeX Font Info: Redeclaring math symbol \circledcirc on input line 162. LaTeX Font Info: Redeclaring math symbol \circledast on input line 163. LaTeX Font Info: Redeclaring math symbol \circleddash on input line 164. LaTeX Font Info: Redeclaring math symbol \lvertneqq on input line 166. LaTeX Font Info: Redeclaring math symbol \gvertneqq on input line 167. LaTeX Font Info: Redeclaring math symbol \nleq on input line 168. LaTeX Font Info: Redeclaring math symbol \ngeq on input line 169. LaTeX Font Info: Redeclaring math symbol \nless on input line 170. LaTeX Font Info: Redeclaring math symbol \ngtr on input line 171. LaTeX Font Info: Redeclaring math symbol \nprec on input line 172. LaTeX Font Info: Redeclaring math symbol \nsucc on input line 173. LaTeX Font Info: Redeclaring math symbol \lneqq on input line 174. LaTeX Font Info: Redeclaring math symbol \gneqq on input line 175. LaTeX Font Info: Redeclaring math symbol \nleqslant on input line 176. LaTeX Font Info: Redeclaring math symbol \ngeqslant on input line 177. LaTeX Font Info: Redeclaring math symbol \lneq on input line 178. LaTeX Font Info: Redeclaring math symbol \gneq on input line 179. LaTeX Font Info: Redeclaring math symbol \npreceq on input line 180. LaTeX Font Info: Redeclaring math symbol \nsucceq on input line 181. LaTeX Font Info: Redeclaring math symbol \precnsim on input line 182. LaTeX Font Info: Redeclaring math symbol \succnsim on input line 183. LaTeX Font Info: Redeclaring math symbol \lnsim on input line 184. LaTeX Font Info: Redeclaring math symbol \gnsim on input line 185. LaTeX Font Info: Redeclaring math symbol \nleqq on input line 186. LaTeX Font Info: Redeclaring math symbol \ngeqq on input line 187. LaTeX Font Info: Redeclaring math symbol \precneqq on input line 188. LaTeX Font Info: Redeclaring math symbol \succneqq on input line 189. LaTeX Font Info: Redeclaring math symbol \precnapprox on input line 190. LaTeX Font Info: Redeclaring math symbol \succnapprox on input line 191. LaTeX Font Info: Redeclaring math symbol \lnapprox on input line 192. LaTeX Font Info: Redeclaring math symbol \gnapprox on input line 193. LaTeX Font Info: Redeclaring math symbol \nsim on input line 194. LaTeX Font Info: Redeclaring math symbol \ncong on input line 195. LaTeX Font Info: Redeclaring math symbol \diagup on input line 196. LaTeX Font Info: Redeclaring math symbol \diagdown on input line 197. LaTeX Font Info: Redeclaring math symbol \varsubsetneq on input line 198. LaTeX Font Info: Redeclaring math symbol \varsupsetneq on input line 199. LaTeX Font Info: Redeclaring math symbol \nsubseteqq on input line 200. LaTeX Font Info: Redeclaring math symbol \nsupseteqq on input line 201. LaTeX Font Info: Redeclaring math symbol \subsetneqq on input line 202. LaTeX Font Info: Redeclaring math symbol \supsetneqq on input line 203. LaTeX Font Info: Redeclaring math symbol \varsubsetneqq on input line 204. LaTeX Font Info: Redeclaring math symbol \varsupsetneqq on input line 205. LaTeX Font Info: Redeclaring math symbol \subsetneq on input line 206. LaTeX Font Info: Redeclaring math symbol \supsetneq on input line 207. LaTeX Font Info: Redeclaring math symbol \nsubseteq on input line 208. LaTeX Font Info: Redeclaring math symbol \nsupseteq on input line 209. LaTeX Font Info: Redeclaring math symbol \nparallel on input line 210. LaTeX Font Info: Redeclaring math symbol \nmid on input line 211. LaTeX Font Info: Redeclaring math symbol \nshortmid on input line 212. LaTeX Font Info: Redeclaring math symbol \nshortparallel on input line 213. LaTeX Font Info: Redeclaring math symbol \nvdash on input line 214. LaTeX Font Info: Redeclaring math symbol \nVdash on input line 215. LaTeX Font Info: Redeclaring math symbol \nvDash on input line 216. LaTeX Font Info: Redeclaring math symbol \nVDash on input line 217. LaTeX Font Info: Redeclaring math symbol \ntrianglerighteq on input line 218 . LaTeX Font Info: Redeclaring math symbol \ntrianglelefteq on input line 219. LaTeX Font Info: Redeclaring math symbol \ntriangleleft on input line 220. LaTeX Font Info: Redeclaring math symbol \ntriangleright on input line 221. LaTeX Font Info: Redeclaring math symbol \nleftarrow on input line 222. LaTeX Font Info: Redeclaring math symbol \nrightarrow on input line 223. LaTeX Font Info: Redeclaring math symbol \nLeftarrow on input line 224. LaTeX Font Info: Redeclaring math symbol \nRightarrow on input line 225. LaTeX Font Info: Redeclaring math symbol \nLeftrightarrow on input line 226. LaTeX Font Info: Redeclaring math symbol \nleftrightarrow on input line 227. LaTeX Font Info: Redeclaring math symbol \divideontimes on input line 228. LaTeX Font Info: Redeclaring math symbol \varnothing on input line 229. LaTeX Font Info: Redeclaring math symbol \nexists on input line 230. LaTeX Font Info: Redeclaring math symbol \Finv on input line 231. LaTeX Font Info: Redeclaring math symbol \Game on input line 232. LaTeX Font Info: Redeclaring math symbol \eth on input line 235. LaTeX Font Info: Redeclaring math symbol \eqsim on input line 236. LaTeX Font Info: Redeclaring math symbol \beth on input line 237. LaTeX Font Info: Redeclaring math symbol \gimel on input line 238. LaTeX Font Info: Redeclaring math symbol \daleth on input line 239. LaTeX Font Info: Redeclaring math symbol \lessdot on input line 240. LaTeX Font Info: Redeclaring math symbol \gtrdot on input line 241. LaTeX Font Info: Redeclaring math symbol \ltimes on input line 242. LaTeX Font Info: Redeclaring math symbol \rtimes on input line 243. LaTeX Font Info: Redeclaring math symbol \shortmid on input line 244. LaTeX Font Info: Redeclaring math symbol \shortparallel on input line 245. LaTeX Font Info: Redeclaring math symbol \smallsetminus on input line 246. LaTeX Font Info: Redeclaring math symbol \thicksim on input line 247. LaTeX Font Info: Redeclaring math symbol \thickapprox on input line 248. LaTeX Font Info: Redeclaring math symbol \approxeq on input line 249. LaTeX Font Info: Redeclaring math symbol \succapprox on input line 250. LaTeX Font Info: Redeclaring math symbol \precapprox on input line 251. LaTeX Font Info: Redeclaring math symbol \curvearrowleft on input line 252. LaTeX Font Info: Redeclaring math symbol \curvearrowright on input line 253. LaTeX Font Info: Redeclaring math symbol \digamma on input line 254. LaTeX Font Info: Redeclaring math symbol \varkappa on input line 255. LaTeX Font Info: Redeclaring math symbol \Bbbk on input line 256. LaTeX Font Info: Redeclaring math symbol \hslash on input line 257. LaTeX Font Info: Redeclaring math symbol \backepsilon on input line 260. ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\setspace\setspace.sty" Package: setspace 2000/12/01 6.7 Contributed and Supported LaTeX2e package Package: `setspace' 6.7 <2000/12/01> ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\fancyhdr\fancyhdr.sty" \fancy@headwidth=\skip56 \f@ncyO@elh=\skip57 \f@ncyO@erh=\skip58 \f@ncyO@olh=\skip59 \f@ncyO@orh=\skip60 \f@ncyO@elf=\skip61 \f@ncyO@erf=\skip62 \f@ncyO@olf=\skip63 \f@ncyO@orf=\skip64 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\geometry\geometry.sty" Package: geometry 2010/09/12 v5.6 Page Geometry \Gm@cnth=\count118 \Gm@cntv=\count119 \c@Gm@tempcnt=\count120 \Gm@bindingoffset=\dimen125 \Gm@wd@mp=\dimen126 \Gm@odd@mp=\dimen127 \Gm@even@mp=\dimen128 \Gm@layoutwidth=\dimen129 \Gm@layoutheight=\dimen130 \Gm@layouthoffset=\dimen131 \Gm@layoutvoffset=\dimen132 \Gm@dimlist=\toks26 ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xetexconfig\geometry.cfg")) ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xepersian\xepersian.sty" Package: xepersian 2010/07/25 v1.0.9a Persian typesetting in XeLaTe X ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\fontspec\fontspec.sty" Package: fontspec 2010/09/29 v2.1b Advanced font selection for XeLaTeX/LuaLaTeX ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\expl3.sty" ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3names.sty" Package: l3names 2010/09/26 v2048 L3 Experimental Naming Scheme for TeX Primiti ves ) Package: expl3 2010/09/16 v2022 L3 Experimental code bundle wrapper ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\misc\etex.sty" Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB) \et@xins=\count121 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3basics.sty" Package: l3basics 2010/09/20 v2037 L3 Experimental basic definitions ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3expan.sty" Package: l3expan 2010/09/20 v2037 L3 Experimental Argument Expansion module ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3tl.sty" Package: l3tl 2010/09/21 v2040 L3 Experimental Token Lists ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3intexpr.sty" Package: l3intexpr 2010/09/22 v2045 L3 Integer Expressions ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3quark.sty" Package: l3quark 2010/09/20 v2036 L3 Experimental Quark Commands ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3seq.sty" Package: l3seq 2010/03/29 v1879 L3 Experimental sequences and stacks ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3toks.sty" Package: l3toks 2010/09/20 v2037 L3 Experimental Token Registers \l_tmpb_toks=\toks27 \l_tmpc_toks=\toks28 \g_tmpa_toks=\toks29 \g_tmpb_toks=\toks30 \g_tmpc_toks=\toks31 \c_empty_toks=\toks32 \l_tl_replace_toks=\toks33 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3int.sty" Package: l3int 2010/09/19 v2029 L3 Experimental Integer module \l_tmpa_int=\count122 \l_tmpb_int=\count123 \l_tmpc_int=\count124 \g_tmpa_int=\count125 \g_tmpb_int=\count126 \c_max_int=\count127 \g_tl_inline_level_int=\count128 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3prg.sty" Package: l3prg 2010/09/22 v2043 L3 Experimental control structures \g_prg_inline_level_int=\count129 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3clist.sty" Package: l3clist 2010/09/20 v2037 L3 Experimental comma separated lists \g_clist_map_inline_int=\count130 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3token.sty" Package: l3token 2010/09/19 v2029 L3 Experimental token investigation and manip ulation ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3prop.sty" Package: l3prop 2010/03/21 v1857 L3 Experimental Property Lists \g_prop_inline_level_int=\count131 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3msg.sty" Package: l3msg 2010/03/23 v1866 L3 Experimental LaTeX Messages module \l_msg_redirect_classes_prop=\toks34 \l_msg_redirect_names_prop=\toks35 \l_msg_redirect_fatal_prop=\toks36 \l_msg_redirect_error_prop=\toks37 \l_msg_redirect_warning_prop=\toks38 \l_msg_redirect_info_prop=\toks39 \l_msg_redirect_log_prop=\toks40 \l_msg_redirect_trace_prop=\toks41 \l_msg_redirect_none_prop=\toks42 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3io.sty" Package: l3io 2010/05/22 v1923 L3 Experimental i/o module \g_iow_streams_prop=\toks43 \g_ior_streams_prop=\toks44 \l_iow_stream_int=\count132 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3skip.sty" Package: l3skip 2010/09/23 v2047 L3 Experimental skip registers \l_tmpa_skip=\skip65 \l_tmpb_skip=\skip66 \l_tmpc_skip=\skip67 \g_tmpa_skip=\skip68 \g_tmpb_skip=\skip69 \l_tmpa_dim=\dimen133 \l_tmpb_dim=\dimen134 \l_tmpc_dim=\dimen135 \l_tmpd_dim=\dimen136 \g_tmpa_dim=\dimen137 \g_tmpb_dim=\dimen138 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3box.sty" Package: l3box 2010/09/26 v2048 L3 Experimental Box module \l_tmpb_box=\box29 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3keyval.sty" Package: l3keyval 2010/04/11 v1890 L3 Experimental keyval processing \l_KV_level_int=\count133 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3keys.sty" Package: l3keys 2010/05/24 v1931 L3 Experimental key-value support \l_keys_choice_int=\count134 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3precom.sty" Package: l3precom 2010/02/09 v1793 L3 Experimental precompilation module \g_gen_sym_int=\count135 \g_ggen_sym_int=\count136 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3xref.sty" Package: l3xref 2010/02/09 v1786 L3 Experimental cross referencing \g_xref_all_curr_immediate_fields_prop=\toks45 \g_xref_all_curr_deferred_fields_prop=\toks46 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3file.sty" Package: l3file 2010/03/21 v1853 L3 Experimental file loading ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3fp.sty" Package: l3fp 2010/09/19 v2029 L3 Experimental floating-point operations \c_forty_four=\count137 \c_one_hundred=\count138 \c_one_thousand=\count139 \c_one_million=\count140 \c_one_hundred_million=\count141 \c_five_hundred_million=\count142 \c_one_thousand_million=\count143 \c_fp_pi_by_four_decimal_int=\count144 \c_fp_pi_by_four_extended_int=\count145 \c_fp_pi_decimal_int=\count146 \c_fp_pi_extended_int=\count147 \c_fp_two_pi_decimal_int=\count148 \c_fp_two_pi_extended_int=\count149 \l_fp_count_int=\count150 \l_fp_div_offset_int=\count151 \l_fp_input_a_sign_int=\count152 \l_fp_input_a_integer_int=\count153 \l_fp_input_a_decimal_int=\count154 \l_fp_input_a_exponent_int=\count155 \l_fp_input_b_sign_int=\count156 \l_fp_input_b_integer_int=\count157 \l_fp_input_b_decimal_int=\count158 \l_fp_input_b_exponent_int=\count159 \l_fp_input_a_extended_int=\count160 \l_fp_input_b_extended_int=\count161 \l_fp_mul_a_i_int=\count162 \l_fp_mul_a_ii_int=\count163 \l_fp_mul_a_iii_int=\count164 \l_fp_mul_a_iv_int=\count165 \l_fp_mul_a_v_int=\count166 \l_fp_mul_a_vi_int=\count167 \l_fp_mul_b_i_int=\count168 \l_fp_mul_b_ii_int=\count169 \l_fp_mul_b_iii_int=\count170 \l_fp_mul_b_iv_int=\count171 \l_fp_mul_b_v_int=\count172 \l_fp_mul_b_vi_int=\count173 \l_fp_mul_output_int=\count174 \l_fp_output_sign_int=\count175 \l_fp_output_integer_int=\count176 \l_fp_output_decimal_int=\count177 \l_fp_output_exponent_int=\count178 \l_fp_output_extended_int=\count179 \l_fp_round_position_int=\count180 \l_fp_round_target_int=\count181 \l_fp_split_sign_int=\count182 \l_fp_tmp_int=\count183 \l_fp_trig_octant_int=\count184 \l_fp_trig_sign_int=\count185 \l_fp_trig_decimal_int=\count186 \l_fp_trig_extended_int=\count187 \l_fp_tmp_dim=\dimen139 \l_fp_tmp_skip=\skip70 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\expl3\l3luatex.sty" Package: l3luatex 2010/07/18 v1985 L3 Experimental LuaTeX functions \g_cctab_allocate_int=\count188 \g_cctab_stack_int=\count189 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\tools\calc.sty" Package: calc 2007/08/22 v4.3 Infix arithmetic (KKT,FJ) \calc@Acount=\count190 \calc@Bcount=\count191 \calc@Adimen=\dimen140 \calc@Bdimen=\dimen141 \calc@Askip=\skip71 \calc@Bskip=\skip72 LaTeX Info: Redefining \setlength on input line 76. LaTeX Info: Redefining \addtolength on input line 77. \calc@Ccount=\count192 \calc@Cskip=\skip73 )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\xpackages\xbase\xparse.sty" Package: xparse 2010/09/20 v2037 Generic document command parser \c_xparse_shorthands_prop=\toks47 \l_xparse_m_args_int=\count193 \l_xparse_mandatory_args_int=\count194 \l_xparse_processor_int=\count195 \l_xparse_total_args_int=\count196 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\binhex\binhex.tex") \l_fontspec_script_int=\count197 \l_fontspec_language_int=\count198 \l_fontspec_strnum_int=\count199 Variant \tl_gset:cV already defined; not changing it on line 79 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\xkeyval\xkeyval.sty" Package: xkeyval 2008/08/13 v2.6a package option processing (HA) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\xkeyval\xkeyval.tex" \XKV@toks=\toks48 \XKV@tempa@toks=\toks49 \XKV@depth=\count200 File: xkeyval.tex 2008/08/13 v2.6a key=value parser (HA) )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\fontspec\fontspec-patches.sty" Package: fontspec-patches 2010/09/29 v2.1b Advanced font selection for XeLaTeX/ LuaLaTeX ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\base\fixltx2e.sty" Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX LaTeX Info: Redefining \em on input line 420. LaTeX Info: The control sequence `\[' is already robust on input line 471. LaTeX Info: The control sequence `\]' is already robust on input line 472. ) LaTeX Info: Redefining \em on input line 22. LaTeX Info: Redefining \emph on input line 29. LaTeX Info: Redefining \- on input line 32. ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\base\fontenc.sty" Package: fontenc 2005/09/27 v1.99g Standard LaTeX package ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\euenc\eu1enc.def" File: eu1enc.def 2010/05/27 v0.1h Experimental Unicode font encodings ) LaTeX Font Info: Try loading font information for EU1+lmr on input line 100. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\euenc\eu1lmr.fd" File: eu1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern )) ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xunicode\xunicode.sty" File: xunicode.sty 2008/02/08 v0.91 provides access to latin accents and many o ther characters in Unicode lower plane ) LaTeX Info: Defining document command \fontspec (LaTeX) with arg. spec. 'O{}m' on line 315. LaTeX Info: Defining document command \setmainfont (LaTeX) with arg. spec. 'O{}m' on line 319. LaTeX Info: Defining document command \setsansfont (LaTeX) with arg. spec. 'O{}m' on line 323. LaTeX Info: Defining document command \setmonofont (LaTeX) with arg. spec. 'O{}m' on line 327. LaTeX Info: Defining document command \setmathrm (LaTeX) with arg. spec. 'O{}m' on line 331. LaTeX Info: Defining document command \setboldmathrm (LaTeX) with arg. spec. 'O{}m' on line 334. LaTeX Info: Defining document command \setmathsf (LaTeX) with arg. spec. 'O{}m' on line 337. LaTeX Info: Defining document command \setmathtt (LaTeX) with arg. spec. 'O{}m' on line 340. LaTeX Info: Defining document command \newfontfamily (LaTeX) with arg. spec. 'mO{}m' on line 356. LaTeX Info: Defining document command \newfontface (LaTeX) with arg. spec. 'mO{}m' on line 359. LaTeX Info: Defining document command \defaultfontfeatures (LaTeX) with arg. spec. 'm' on line 362. LaTeX Info: Defining document command \addfontfeatures (LaTeX) with arg. spec. 'm' on line 379. LaTeX Info: Defining document command \newfontfeature (LaTeX) with arg. spec. 'mm' on line 386. LaTeX Info: Defining document command \newAATfeature (LaTeX) with arg. spec. 'mmmm' on line 395. LaTeX Info: Defining document command \newICUfeature (LaTeX) with arg. spec. 'mmm' on line 404. LaTeX Info: Defining document command \aliasfontfeature (LaTeX) with arg. spec. 'mm' on line 406. LaTeX Info: Defining document command \aliasfontfeatureoption (LaTeX) with arg. spec. 'mmm' on line 409. LaTeX Info: Defining document command \newfontscript (LaTeX) with arg. spec. 'mm' on line 414. LaTeX Info: Defining document command \newfontlanguage (LaTeX) with arg. spec. 'mm' on line 432. LaTeX Info: Defining document command \DeclareFontsExtensions (LaTeX) with arg. spec. 'm' on line 449. \c@fontspec_tmp_int=\count201 LaTeX Info: Redefining \itshape on input line 2016. LaTeX Info: Redefining \slshape on input line 2020. LaTeX Info: Redefining \scshape on input line 2024. LaTeX Info: Redefining \upshape on input line 2028. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\fontspec\fontspec.cfg")) ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xepersian\xepersian-persiancal. sty" Package: xepersian-persiancal 2010/07/25 v0.1 provides Persian calendar Normal \count register pool exhausted, switching to extended pool. \XePersian@i=\count277 \XePersian@y=\count278 \XePersian@m=\count279 \XePersian@d=\count280 \XePersian@latini=\count281 \XePersian@persiani=\count282 \XePersian@latinii=\count283 \XePersian@persianii=\count284 \XePersian@latiniii=\count285 \XePersian@persianiii=\count286 \XePersian@latiniv=\count287 \XePersian@persianiv=\count288 \XePersian@latinv=\count289 \XePersian@persianv=\count290 \XePersian@latinvi=\count291 \XePersian@persianvi=\count292 \XePersian@latinvii=\count293 \XePersian@persianvii=\count294 \XePersian@latinviii=\count295 \XePersian@persianviii=\count296 \XePersian@latinix=\count297 \XePersian@persianix=\count298 \XePersian@latinx=\count299 \XePersian@persianx=\count300 \XePersian@latinxi=\count301 \XePersian@persianxi=\count302 \XePersian@latinxii=\count303 \XePersian@persianxii=\count304 \XePersian@persianxiii=\count305 \XePersian@temp=\count306 \XePersian@temptwo=\count307 \XePersian@tempthree=\count308 \XePersian@yModHundred=\count309 \XePersian@thirtytwo=\count310 \XePersian@dn=\count311 \XePersian@sn=\count312 \XePersian@mminusone=\count313 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xepersian\xepersian-mathsdigits pec.sty" Package: xepersian-mathsdigitspec 2010/07/25 v0.6a Unicode Persian maths digits in XeLaTeX ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\etoolbox\etoolbox.sty" Package: etoolbox 2010/09/12 v2.0a e-TeX tools for LaTeX \etb@tempcnta=\count314 ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\bidi.sty" Package: bidi 2010/08/01 v1.1.4c Bidirectional typesetting in plain TeX and LaTeX bidi package (Support for bidirectional typesetting in plain TeX and LaTeX) Description: A convenient interface for typesetting bidirectional texts in plain TeX and LaTeX. The package includes adaptations for use with many other commonly-used packages. Copyright © 2009-2010 Vafa Khalighi v1.1.4c, , 2010/08/01 License: LaTeX Project Public License, version 1.3c or higher (your choice) Home: http://bitbucket.org/vafa/bidi Location on CTAN: /macros/latex/contrib/bidi ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\iftex\iftex.sty" Package: iftex 2010/07/25 v0.2 Provides if(tex) conditional for PDFTeX, XeTeX, and LuaTeX ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\loadingorder-bidi.def" File: loadingorder-bidi.def 2010/07/25 v0.5 making sure that bidi is the last p ackage loaded ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\xetex-bidi.def" File: xetex-bidi.def 2010/08/01 v0.8 bidi adaptations for XeTeX engine \n@everypar=\toks50 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\footnote-xetex-bidi.def" File: footnote-xetex-bidi.def 2010/07/25 v0.5 bidi footnote macros for XeTeX en gine ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\report-xetex-bidi.def" File: report-xetex-bidi.def 2010/07/25 v0.5 bidi adaptations for standard repor t class for XeTeX engine ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\amsmath-xetex-bidi.def" File: amsmath-xetex-bidi.def 2010/07/25 v0.2 bidi adaptations for amsmath packa ge for XeTeX engine LaTeX Info: Redefining \[ on input line 24. LaTeX Info: Redefining \] on input line 25. ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\amsthm-xetex-bidi.def" File: amsthm-xetex-bidi.def 2010/07/25 v0.1 bidi adaptations for amsthm package for XeTeX engine ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\caption-xetex-bidi.def" File: caption-xetex-bidi.def 2010/07/25 v0.1 bidi adaptations for caption packa ge for XeTeX engine ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\graphicx-xetex-bidi.def" File: graphicx-xetex-bidi.def 2010/07/25 v0.3 bidi adaptations for graphicx pac kage for XeTeX engine ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\hyperref-xetex-bidi.def" File: hyperref-xetex-bidi.def 2010/07/25 v0.4 bidi adaptations for hyperref pac kage for XeTeX engine ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\fancyhdr-xetex-bidi.def" File: fancyhdr-xetex-bidi.def 2010/07/25 v0.3 bidi adaptations for fancyhdr pac kage for XeTeX engine ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\bidi\subfigure-xetex-bidi.def" File: subfigure-xetex-bidi.def 2010/03/01 v0.1 bidi adaptations for subfigure p ackage for XeTeX engine ))) xepersian package (Persian for LaTeX over XeTeX) Description: The package supports Persian typesetting, using fonts provided in the distribution. Copyright © 2008-2010 Vafa Khalighi v1.0.9a, , 2010/07/25 License: LaTeX Project Public License, version 1.3c or higher (your choice) Home: http://bitbucket.org/vafa/xepersian Location on CTAN: /macros/xetex/latex/xepersian ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xepersian\loadingorder-bidi-xep ersian.def" File: loadingorder-bidi-xepersian.def 2010/07/25 v0.2 making sure that xepersia n is the last package loaded ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xepersian\footnote-bidi-xepersi an.def" File: footnote-bidi-xepersian.def 2010/07/25 v0.2 footnote macros for xepersian package ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xepersian\hyperref-xepersian.de f" File: hyperref-xepersian.def 2010/07/25 v0.3 bilingual captions for hyperref pa ckage ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\xelatex\xepersian\report-xepersian.def" File: report-xepersian.def 2010/07/25 v0.2 adaptations for standard report clas s )) Package Fancyhdr Warning: \fancyhead's `E' option without twoside option is use less on input line 24. \c@theorem=\count315 \c@lemma=\count316 fontspec Warning: Language 'Parsi' not available (fontspec) for font 'Nazanin' with script 'Parsi'. (fontspec) 'Default' language used instead. \g_fontspec_family_Nazanin_int=\count317 fontspec Info: Defining font family for 'Nazanin' with options [Script=Parsi,L anguage=Parsi,Mapping=parsidigits,Scale=1.]. fontspec Info: Defining shape 'normal' with NFSS specification: (fontspec) <->s*[1.]"Nazanin/ICU:script=arab;language=DFLT;mapping=parsidigits ;" fontspec Info: Defining shape 'bold' with NFSS specification: (fontspec) <->s*[1.]"Nazanin/B/ICU:script=arab;language=DFLT;mapping=parsidigi ts;" fontspec Info: Could not resolve font Nazanin/I (it probably doesn't exist). fontspec Info: Defining shape 'bold italic' with NFSS specification: (fontspec) <->s*[1.]"Nazanin/BI/ICU:script=arab;language=DFLT;mapping=parsidig its;" LaTeX Font Info: Font shape `EU1/Nazanin(0)/m/n' will be (Font) scaled to size 10.0pt on input line 95. \g_fontspec_family_XB Zar_int=\count318 fontspec Info: Defining font family for 'XB Zar' with options []. fontspec Info: Defining shape 'normal' with NFSS specification: (fontspec) <->"XB Zar/ICU:script=latn;language=DFLT;" fontspec Info: Defining shape 'bold' with NFSS specification: (fontspec) <->"XB Zar/B/ICU:script=latn;language=DFLT;" fontspec Info: Defining shape 'italic' with NFSS specification: (fontspec) <->"XB Zar/I/ICU:script=latn;language=DFLT;" fontspec Info: Defining shape 'bold italic' with NFSS specification: (fontspec) <->"XB Zar/BI/ICU:script=latn;language=DFLT;" Package xepersian-mathsdigitspec Info: Defining the default Persian maths digit s font as 'XB Zar' on input line 96. \symOPERATORS=\mathgroup10 fontspec Info: Font Times New Roman does not contain any OpenType `Script' inf ormation. \g_fontspec_family_Times New Roman_int=\count319 fontspec Info: Defining font family for 'Times New Roman' with options [Mappin g=tex-text,Scale=1]. fontspec Info: Defining shape 'normal' with NFSS specification: (fontspec) <->s*[1]"Times New Roman/ICU:mapping=tex-text;" fontspec Info: Defining shape 'bold' with NFSS specification: (fontspec) <->s*[1]"Times New Roman/B/ICU:mapping=tex-text;" fontspec Info: Defining shape 'italic' with NFSS specification: (fontspec) <->s*[1]"Times New Roman/I/ICU:mapping=tex-text;" fontspec Info: Defining shape 'bold italic' with NFSS specification: (fontspec) <->s*[1]"Times New Roman/BI/ICU:mapping=tex-text;" ("C:\Users\Sareh\Desktop\najme thesis\maindoc.aux" ("C:\Users\Sareh\Desktop\najme thesis\empty.aux") ("C:\Users\Sareh\Desktop\najme thesis\besm.aux") ("C:\Users\Sareh\Desktop\najme thesis\cover.aux") ("C:\Users\Sareh\Desktop\najme thesis\right.aux") ("C:\Users\Sareh\Desktop\najme thesis\Taied.aux") ("C:\Users\Sareh\Desktop\najme thesis\thanks.aux") ("C:\Users\Sareh\Desktop\najme thesis\abstract_fa.aux") ("C:\Users\Sareh\Desktop\najme thesis\introduction.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap1.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap2.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap3.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap4.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap5.aux") ("C:\Users\Sareh\Desktop\najme thesis\result.aux") ("C:\Users\Sareh\Desktop\najme thesis\peyvast1.aux") ("C:\Users\Sareh\Desktop\najme thesis\peyvast2.aux") ("C:\Users\Sareh\Desktop\najme thesis\peyvast3.aux") ("C:\Users\Sareh\Desktop\najme thesis\references.aux") ("C:\Users\Sareh\Desktop\najme thesis\abstract_en.aux") ("C:\Users\Sareh\Desktop\najme thesis\cover_en.aux")) LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for PD1/pdf/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for PU/pdf/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Checking defaults for EU1/lmr/m/n on input line 150. LaTeX Font Info: ... okay on input line 150. LaTeX Font Info: Font shape `EU1/Nazanin(0)/m/n' will be (Font) scaled to size 10.95pt on input line 150. Package caption Info: Begin \AtBeginDocument code. Package caption Info: hyperref package is loaded. Package caption Info: End \AtBeginDocument code. \AtBeginShipoutBox=\box30 ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\graphics\color.sty" Package: color 2005/11/14 v1.0j Standard LaTeX Color (DPC) ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\00miktex\color.cfg" File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive ) Package color Info: Driver file: xetex.def on input line 130. ) Package hyperref Info: Link coloring ON on input line 150. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\hyperref\nameref.sty" Package: nameref 2010/04/30 v2.40 Cross-referencing by name of section ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\oberdiek\refcount.sty" Package: refcount 2008/08/11 v3.1 Data extraction from references (HO) ) ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\gettitlestring.sty" Package: gettitlestring 2009/12/18 v1.3 Cleanup title references (HO) ) \c@section@level=\count320 ) LaTeX Info: Redefining \ref on input line 150. LaTeX Info: Redefining \pageref on input line 150. LaTeX Info: Redefining \nameref on input line 150. ("C:\Users\Sareh\Desktop\najme thesis\maindoc.out") ("C:\Users\Sareh\Desktop\najme thesis\maindoc.out") \@outlinefile=\write3 *geometry* detected driver: pdftex *geometry* verbose mode - [ preamble ] result: * driver: pdftex * paper: a4paper * layout: * layoutoffset:(h,v)=(0.0pt,0.0pt) * modes: * h-part:(L,W,R)=(99.58464pt, 398.3386pt, 99.58464pt) * v-part:(T,H,B)=(99.58464pt, 645.87756pt, 99.58464pt) * \paperwidth=597.50787pt * \paperheight=845.04684pt * \textwidth=398.3386pt * \textheight=645.87756pt * \oddsidemargin=27.31465pt * \evensidemargin=27.31465pt * \topmargin=-9.68535pt * \headheight=12.0pt * \headsep=25.0pt * \topskip=11.0pt * \footskip=30.0pt * \marginparwidth=50.0pt * \marginparsep=10.0pt * \columnsep=10.0pt * \skip\footins=10.0pt plus 4.0pt minus 2.0pt * \hoffset=0.0pt * \voffset=0.0pt * \mag=1000 * \@twocolumnfalse * \@twosidefalse * \@mparswitchfalse * \@reversemarginfalse * (1in=72.27pt=25.4mm, 1cm=28.453pt) Package xepersian Info: “You have not specified any font for the digits in ma ths mode and so the digits in maths mode will appear Latin. If you would like t o have Persian digits in maths mode, then please specify a font for the digits in maths mode by using \setdigitfont CS, and then try to run xelatex on your do cument again” on input line 150. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. ("C:\Program Files (x86)\MiKTeX 2.8\tex\generic\oberdiek\se-ascii-print.def" File: se-ascii-print.def 2010/03/01 v1.8 stringenc: Printable ASCII characters ) [1 ] ("C:\Users\Sareh\Desktop\najme thesis\empty.tex") ("C:\Users\Sareh\Desktop\najme thesis\besm.tex" fontspec Warning: Language 'Parsi' not available (fontspec) for font 'IranNastaliq' with script 'Parsi'. (fontspec) 'Default' language used instead. \g_fontspec_family_IranNastaliq_int=\count321 fontspec Info: Defining font family for 'IranNastaliq' with options [Script=Pa rsi,Language=Parsi,Mapping=parsidigits,Scale=3]. fontspec Info: Defining shape 'normal' with NFSS specification: (fontspec) <->s*[3]"IranNastaliq/ICU:script=arab;language=DFLT;mapping=parsidi gits;" fontspec Info: Could not resolve font IranNastaliq/B (it probably doesn't exis t). fontspec Info: Could not resolve font IranNastaliq/I (it probably doesn't exis t). fontspec Info: Could not resolve font IranNastaliq/BI (it probably doesn't exi st). LaTeX Info: Redefining \persianfont on input line 2. LaTeX Font Info: Font shape `EU1/IranNastaliq(0)/m/n' will be (Font) scaled to size 32.84999pt on input line 2. LaTeX Font Info: Try loading font information for U+rsfs on input line 4. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\jknappen\ursfs.fd" File: ursfs.fd 1998/03/24 rsfs font definition file (jk) ) LaTeX Font Info: Try loading font information for U+msa on input line 4. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\amsfonts\umsa.fd" File: umsa.fd 2009/06/22 v3.00 AMS symbols A ) LaTeX Font Info: Try loading font information for U+msb on input line 4. ("C:\Program Files (x86)\MiKTeX 2.8\tex\latex\amsfonts\umsb.fd" File: umsb.fd 2009/06/22 v3.00 AMS symbols B ) ! Undefined control sequence. l.6 {\nastaliq The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Underfull \hbox (badness 10000) in paragraph at lines 4--7 [][] [] LaTeX Font Info: Font shape `EU1/IranNastaliq(0)/m/n' will be (Font) scaled to size 74.64001pt on input line 8. ! Extra }, or forgotten \endgroup. l.14 } I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ) [2 ] ("C:\Users\Sareh\Desktop\najme thesis\cover.tex" fontspec Info: Defining font family for 'XB Zar' with options [Script=Parsi,La nguage=Parsi,Mapping=parsidigits,Scale=1.0]. fontspec Info: Defining shape 'normal' with NFSS specification: (fontspec) <->s*[1.0]"XB Zar/ICU:script=arab;language=FAR;mapping=parsidigits; " fontspec Info: Defining shape 'bold' with NFSS specification: (fontspec) <->s*[1.0]"XB Zar/B/ICU:script=arab;language=FAR;mapping=parsidigit s;" fontspec Info: Defining shape 'italic' with NFSS specification: (fontspec) <->s*[1.0]"XB Zar/I/ICU:script=arab;language=FAR;mapping=parsidigit s;" fontspec Info: Defining shape 'bold italic' with NFSS specification: (fontspec) <->s*[1.0]"XB Zar/BI/ICU:script=arab;language=FAR;mapping=parsidigi ts;" LaTeX Info: Redefining \persianfont on input line 1. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 10.95pt on input line 1. LaTeX Warning: File `logo.jpg' not found on input line 7. ! Unable to load picture or PDF file 'logo.jpg'. } l.7 ...ine{\includegraphics[height=3cm]{logo.jpg}} The requested image couldn't be read because it was not a recognized image format. ! Package graphics Error: Division by 0. See the graphics package documentation for explanation. Type H for immediate help. ... l.7 ...ine{\includegraphics[height=3cm]{logo.jpg}} Your command was ignored. Type I to replace it with another command, or to continue without it. File: logo.jpg Graphic file (type QTm) ! Unable to load picture or PDF file 'logo.jpg'. \GXT@clipend l.7 ...ine{\includegraphics[height=3cm]{logo.jpg}} The requested image couldn't be read because it was not a recognized image format. ! Undefined control sequence. l.13 \Nazanin {دانشگاه اصفهان} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.16 \Nazanin {دانشکده زبان‌های خارجی } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.18 \Nazanin {گروه زبان‌شناسی} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 14.4pt on input line 20. LaTeX Font Info: Font shape `EU1/XBZar(1)/bx/n' will be (Font) scaled to size 14.4pt on input line 21. ! Undefined control sequence. \Nazanin l.21 \textbf \Nazanin { پایان‌نامه‌ی کارشناسی ارشد ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.24 \\ [1cm] Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. l.25 {\titr The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 24.88pt on input line 26. ! Undefined control sequence. l.27 \Titr { تحلیل انتقادی-شناختی گفتمان سیاست ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.29 \Nazanin {} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.31 \\ [0.5cm] Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 12.0pt on input line 32. ! Undefined control sequence. l.32 {\large {\Nazanin The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.35 {\large \Nazanin دکتر حدائق رضایی \\ } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.39 \\ [0.3cm] Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. l.40 {\large\Nazanin دکتر والي رضايي \\ } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.41 \\ [1cm] Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. l.42 {\large\Nazanin پژوهشگر:}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.44 {\large \Nazanin ساره خيرمند پاریزی} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.46 {\large \Nazanin بهمن ماه 1394} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ) [3 ] ("C:\Users\Sareh\Desktop\najme thesis\right.tex" ! Undefined control sequence. l.6 {\nastaliq The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Underfull \hbox (badness 10000) in paragraph at lines 4--7 [][] [] ! Extra }, or forgotten \endgroup. l.18 } I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ) [4 ] ("C:\Users\Sareh\Desktop\najme thesis\Taied.tex" fontspec Info: Defining font family for 'XB Zar' with options [Script=Parsi,La nguage=Parsi,Mapping=parsidigits,Scale=1.1]. fontspec Info: Defining shape 'normal' with NFSS specification: (fontspec) <->s*[1.1]"XB Zar/ICU:script=arab;language=FAR;mapping=parsidigits; " fontspec Info: Defining shape 'bold' with NFSS specification: (fontspec) <->s*[1.1]"XB Zar/B/ICU:script=arab;language=FAR;mapping=parsidigit s;" fontspec Info: Defining shape 'italic' with NFSS specification: (fontspec) <->s*[1.1]"XB Zar/I/ICU:script=arab;language=FAR;mapping=parsidigit s;" fontspec Info: Defining shape 'bold italic' with NFSS specification: (fontspec) <->s*[1.1]"XB Zar/BI/ICU:script=arab;language=FAR;mapping=parsidigi ts;" LaTeX Info: Redefining \persianfont on input line 1. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 12.04506pt on input line 1. LaTeX Warning: File `logo.jpg' not found on input line 7. ! Unable to load picture or PDF file 'logo.jpg'. } l.7 ...ine{\includegraphics[height=3cm]{logo.jpg}} The requested image couldn't be read because it was not a recognized image format. ! Package graphics Error: Division by 0. See the graphics package documentation for explanation. Type H for immediate help. ... l.7 ...ine{\includegraphics[height=3cm]{logo.jpg}} Your command was ignored. Type I to replace it with another command, or to continue without it. File: logo.jpg Graphic file (type QTm) ! Unable to load picture or PDF file 'logo.jpg'. \GXT@clipend l.7 ...ine{\includegraphics[height=3cm]{logo.jpg}} The requested image couldn't be read because it was not a recognized image format. ! Undefined control sequence. l.13 \Nazanin {دانشگاه اصفهان} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.17 \Nazanin {دانشکده زبان‌‌های خارجی } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.19 \Nazanin {گروه زبان‌شناسی} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/XBZar(2)/bx/n' will be (Font) scaled to size 12.04506pt on input line 22. ! Undefined control sequence. \Nazanin l.22 \textbf \Nazanin { \Large پایان‌نامه‌ی کارشناسی ا... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 15.84007pt on input line 22. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.29 \\ [1.4cm] Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. l.30 {\titr The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 27.36815pt on input line 31. ! Undefined control sequence. l.32 \Titr {تحلیل انتقادی-شناختی گفتمان سیاست خ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.35 \\ [1.2cm] Your command was ignored. Type I to replace it with another command, or to continue without it. Overfull \hbox (0.54723pt too wide) in paragraph at lines 38--43 [][][] [] [] ) [5 ] ("C:\Users\Sareh\Desktop\najme thesis\thanks.tex" ! Undefined control sequence. l.6 {\nastaliq The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Underfull \hbox (badness 10000) in paragraph at lines 4--7 [][] [] LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 22.81412pt on input line 11. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.14 Your command was ignored. Type I to replace it with another command, or to continue without it. ) [6 ] ("C:\Users\Sareh\Desktop\najme thesis\abstract_fa.tex" LaTeX Font Info: Font shape `EU1/XBZar(2)/bx/n' will be (Font) scaled to size 15.84007pt on input line 3. ) [7 ] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [8] LaTeX Font Info: Font shape `EU1/XBZar(2)/bx/n' will be (Font) scaled to size 27.36815pt on input line 162. ("C:\Users\Sareh\Desktop\najme thesis\maindoc.toc" [1 ] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. ! Undefined control sequence. \f@ncyocf ->\centerplain {}{\thepage }\strut l.55 ...ی و تقویتی}{83}{subsection.4.6.3} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [2] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. ! Undefined control sequence. \f@ncyocf ->\centerplain {}{\thepage }\strut l.87 ...دئولوژیکی}{98}{subsection.4.11.5} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [3] Overfull \hbox (2.50308pt too wide) detected at line 91 []\EU1/XBZar(2)/m/n/10.95 ۱۰۱ [] Overfull \hbox (2.50308pt too wide) detected at line 92 []\EU1/XBZar(2)/m/n/10.95 ۱۰۱ [] Overfull \hbox (2.50308pt too wide) detected at line 93 []\EU1/XBZar(2)/m/n/10.95 ۱۰۲ [] Overfull \hbox (2.50308pt too wide) detected at line 94 []\EU1/XBZar(2)/m/n/10.95 ۱۰۳ [] Overfull \hbox (2.50308pt too wide) detected at line 95 []\EU1/XBZar(2)/m/n/10.95 ۱۰۳ [] Overfull \hbox (2.50308pt too wide) detected at line 96 []\EU1/XBZar(2)/m/n/10.95 ۱۰۴ [] Overfull \hbox (2.50308pt too wide) detected at line 97 []\EU1/XBZar(2)/m/n/10.95 ۱۰۵ [] Overfull \hbox (2.50308pt too wide) detected at line 98 []\EU1/XBZar(2)/m/n/10.95 ۱۰۶ [] ) \tf@toc=\write4 Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. ! Undefined control sequence. \f@ncyocf ->\centerplain {}{\thepage }\strut l.163 \listoffigures The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [4] ("C:\Users\Sareh\Desktop\najme thesis\maindoc.lof") \tf@lof=\write5 [5 ] ("C:\Users\Sareh\Desktop\najme thesis\introduction.tex" LaTeX Font Info: Font shape `EU1/XBZar(2)/bx/n' will be (Font) scaled to size 13.20007pt on input line 4. ) [6 ] ("C:\Users\Sareh\Desktop\najme thesis\chap1.tex" فصل 1. ! Undefined control sequence. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{کلیات پژوهش} % برای این که شماره‌گذ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{کلیات پژوهش} % برای این که شماره‌گذ... I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \@makechapterhead ...mdepth >\m@ne \if@mainmatter \par \huge \@chapapp \spac... l.1 \chapter{کلیات پژوهش} % برای این که شماره‌گذ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/XBZar(2)/bx/n' will be (Font) scaled to size 22.81412pt on input line 1. ! Undefined control sequence. \@makechapterhead ...p \space {\bf \chapternumber \bf \thechapter } \par \no... l.1 \chapter{کلیات پژوهش} % برای این که شماره‌گذ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 8.80005pt on input line 39. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 9.90005pt on input line 39. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 6.60004pt on input line 39. [1 ] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [2] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [3] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [4] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [5] LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 13.20007pt on input line 48. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [6] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [7] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [8] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [9] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [10] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [11]) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [12] ! Extra \else. \@include ...ediate \closeout \@partaux \fi \else \deadcycles \z@ \@nameuse ... l.170 \include{chap1} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \@include ...\deadcycles \z@ \@nameuse {cp@#1}\fi \let \@auxout \@mainaux l.170 \include{chap1} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \include ...e nested}\@eha \else \@include #1 \fi l.170 \include{chap1} I'm ignoring this; it doesn't match any \if. ("C:\Users\Sareh\Desktop\najme thesis\chap2.tex" فصل 2. ! Undefined control sequence. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{پيشينه‌ی تحقیق} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{پيشينه‌ی تحقیق} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \@makechapterhead ...mdepth >\m@ne \if@mainmatter \par \huge \@chapapp \spac... l.1 \chapter{پيشينه‌ی تحقیق} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@makechapterhead ...p \space {\bf \chapternumber \bf \thechapter } \par \no... l.1 \chapter{پيشينه‌ی تحقیق} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Misplaced alignment tab character &. ...\@currentlabelname \@empty Bulcaen & Blommaert\fi \else \latin... l.8 ... بالکن \footnote{Bulcaen & Blommaert} $ (2000) $ و بلوما... I can't figure out why you would want to use a tab mark here. If you just want an ampersand, the remedy is simple: Just type `I\&' now. But if some right brace up above has ended a previous alignment prematurely, you're probably due for more error messages, and you might try typing `S' now just to see what is salvageable. [13 ] ! Misplaced alignment tab character &. ...\@currentlabelname \@empty Abelson & Schank\fi \else \latinfon... l.8 ...و آبلسون \footnote{Abelson & Schank} $ (1977) $، لیکاف و... I can't figure out why you would want to use a tab mark here. If you just want an ampersand, the remedy is simple: Just type `I\&' now. But if some right brace up above has ended a previous alignment prematurely, you're probably due for more error messages, and you might try typing `S' now just to see what is salvageable. Overfull \hbox (24.41872pt too wide) in paragraph at lines 8--8 [] [][] \EU1/XBZar(2)/m/n/10.95 در رابطه با پیوند زبان‌شن اسی شناختی و تگفا باید گفت افردای مانند چیل ون $\OT1/cmr/m/n/10.95 ([][][][]; [][][][]; [][][][])$\EU1/XBZar(2)/m/n/10.9 5 ،[] [] Overfull \hbox (12.15047pt too wide) in paragraph at lines 8--8 []\EU1/XBZar(2)/m/n/10.95 فرکلاف $\OT1/cmr/m/n/10.95 ([][][][]\OML/cmm/m/ it/10.95 b\OT1/cmr/m/n/10.95 ; [][][][]\OML/cmm/m/it/10.95 a\OT1/cmr/m/n/10.95 ; [][][][])$ \EU1/XBZar(2)/m/n/10.95 لیکاف $\OT1/cmr/m/n/10.95 ([][][][]; [][][][]; [][][][])$ \EU1/XBZar(2)/m/n/10.95 و ون‌دایک $\OT1/cmr/m/n/1 0.95 ([][][][]; [][][][]; [][][][])$[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [14] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [15] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [16] Overfull \hbox (3.14508pt too wide) in paragraph at lines 8--9 []\EU1/XBZar(2)/m/n/10.95 ولیکاف $\OT1/cmr/m/n/10.95 ([][][][])$\EU1/XBZa r(2)/m/n/10.95 ، ال‌رافائه $\OT1/cmr/m/n/10.95 ([][][][])$\EU1/XBZar (2)/m/n/10.95 ، گوتلی $\OT1/cmr/m/n/10.95 ([][][][])$\EU1/XBZar(2)/m/n/10 .95 ، کولر$\OT1/cmr/m/n/10.95 ([][][][]\OML/cmm/m/it/10.95 ; [][][][]\OT1/ cmr/m/n/10.95 )$\EU1/XBZar(2)/m/n/10.95 ، مالج $\OT1/cmr/m/n/10.95 ([][][] [])$\EU1/XBZar(2)/m/n/10.95 ، موسولف[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [17] Overfull \hbox (3.00722pt too wide) in paragraph at lines 14--14 []\EU1/XBZar(2)/m/n/10.95 چرا قالب‌بندی راهبردی مهم اس ت، با اهداف متقاعد کردن خوانندگان به اهمیت الب بندی راهبردی[][][][][][][][] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [18] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [19] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [20] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [21] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [22] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [23] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [24] Overfull \hbox (20.30963pt too wide) in paragraph at lines 16--16 [][]\EU1/XBZar(2)/bx/n/14.4 پژوهش‌های تحلیل گفتمان انت ادی-شناختی با چارجوب نظریه‌ی[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 16.61487pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [25] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 16.61487pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [26] Overfull \hbox (59.63655pt too wide) in paragraph at lines 21--21 [][]\EU1/XBZar(2)/bx/n/14.4 پژوهش‌های تحلیل انتقادی گف مان‌های سیاست خارجی با چارچوب‌های[] [] Overfull \hbox (8.0378pt too wide) in paragraph at lines 22--22 []\EU1/XBZar(2)/m/n/10.95 اصول‌گرا، به مطالعه‌ی سیاست خارجی جمهوری اسلامی می‌پردازد. چارچوب نظر تحقیق، زبان‌شناسی[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [27] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [28] Overfull \hbox (31.36577pt too wide) in paragraph at lines 22--22 [] [][] \EU1/XBZar(2)/m/n/10.95 همتی $\OT1/cmr/m/n/10.95 ([][][][])$\EU1/XB Zar(2)/m/n/10.95 در پایان‌نامه‌ی خود، براساس چارچ وب شبکه‌ی کارگزاران اجتماعی ون‌لیوون$\OT1/cmr /m/n/10.95 ([][][][])$\EU1/XBZar(2)/m/n/10.95 سه[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [29] ! LaTeX Error: Two \documentclass or \documentstyle commands. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.22 ...ررفته ‌است. \documentclass[•]{ •} The document may only declare one class. ) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [30] ! Extra \else. \@include ...ediate \closeout \@partaux \fi \else \deadcycles \z@ \@nameuse ... l.171 \include{chap2} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \@include ...\deadcycles \z@ \@nameuse {cp@#1}\fi \let \@auxout \@mainaux l.171 \include{chap2} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \include ...e nested}\@eha \else \@include #1 \fi l.171 \include{chap2} I'm ignoring this; it doesn't match any \if. ("C:\Users\Sareh\Desktop\najme thesis\chap3.tex" فصل 3. ! Undefined control sequence. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{بنیان نظری} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{بنیان نظری} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \@makechapterhead ...mdepth >\m@ne \if@mainmatter \par \huge \@chapapp \spac... l.1 \chapter{بنیان نظری} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@makechapterhead ...p \space {\bf \chapternumber \bf \thechapter } \par \no... l.1 \chapter{بنیان نظری} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [31 ] LaTeX Font Info: Font shape `EU1/TimesNewRoman(0)/m/n' will be (Font) scaled to size 9.0pt on input line 18. ! Missing \endcsname inserted. \relax l.21 \begin{quote\small} The control sequence marked should not appear between \csname and \endcsname. ! Missing \endcsname inserted. \relax l.21 \begin{quote\small} The control sequence marked should not appear between \csname and \endcsname. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/n' will be (Font) scaled to size 11.00006pt on input line 21. ! Extra \endcsname. \reserved@a ...ne }\csname quote\small \endcsname l.21 \begin{quote\small} I'm ignoring this, since I wasn't doing a \csname. ! Missing \endcsname inserted. \relax l.23 \end{quote\small} The control sequence marked should not appear between \csname and \endcsname. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [32] ! Extra \endcsname. \end #1->\csname end#1\endcsname \@checkend {#1}\expandafter \endgroup \if@e... l.23 \end{quote\small} I'm ignoring this, since I wasn't doing a \csname. File: images/a.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.33 \vspace{0.7} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [33] Overfull \hbox (4.33188pt too wide) in paragraph at lines 39--40 []\EU1/XBZar(2)/m/n/10.95 شناختی مانند دستور نظام-نقشی هالیدی ابزاری برای شناسایی و تحلیل راهبرده ی زبانی و روان‌شناختی[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [34] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [35] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [36] ! Undefined control sequence. \ndent l.43 \paragraph*{\ndent}د ر رابطه با بعد شناخت اجتماع... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [37] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [38] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [39] File: images/b.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.53 \vspace{0.7} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) LaTeX Warning: `!h' float specifier changed to `!ht'. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [40] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [41] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [42] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [43] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.81943pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [44] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [45] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.26053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [46] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [47] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [48] File: images/c.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.78 \vspace{0.7} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 28.86053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [49] ! LaTeX Error: Two \documentclass or \documentstyle commands. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.80 ...ت می‌کنند. \documentclass[•]{ •} The document may only declare one class. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 28.86053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [50]) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 28.86053pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [51] ! Extra \else. \@include ...ediate \closeout \@partaux \fi \else \deadcycles \z@ \@nameuse ... l.172 \include{chap3} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \@include ...\deadcycles \z@ \@nameuse {cp@#1}\fi \let \@auxout \@mainaux l.172 \include{chap3} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \include ...e nested}\@eha \else \@include #1 \fi l.172 \include{chap3} I'm ignoring this; it doesn't match any \if. ("C:\Users\Sareh\Desktop\najme thesis\chap4.tex" فصل 4. ! Undefined control sequence. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{تحلیل داده‌ها} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{تحلیل داده‌ها} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \@makechapterhead ...mdepth >\m@ne \if@mainmatter \par \huge \@chapapp \spac... l.1 \chapter{تحلیل داده‌ها} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@makechapterhead ...p \space {\bf \chapternumber \bf \thechapter } \par \no... l.1 \chapter{تحلیل داده‌ها} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [52 ] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [53] ! Missing $ inserted. $ l.13 ...یر $ (20) $، راه $ (25) $ \Leftarrow $ روش کنش، شرا... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.14 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.14 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.14 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.15 ...دن / برداشتن $ (3) $ \Leftarrow $ ادامه‌ی کنش... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.16 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.16 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.16 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.17 ...یش رو داشتن $ ( 2 ) $ \Leftarrow $ مراحل کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.18 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.18 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.18 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.19 ...ن $ ( 3) $، نقطه $ (1) $ \Leftarrow $ شروع کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.20 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.20 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.20 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.21 ... نشيني کردن $ ( 6 ) $ \Leftarrow $ پسروی در کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.22 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.22 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.22 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.23 \item متوقف شدن $ (1) $ \Leftarrow $ توقف کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.24 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.24 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.24 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.25 ... $ (14) $، رسیدن $ (1) $ \Leftarrow $ وضعیت نهایی ... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.26 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.26 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.26 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.27 \item هم‌پا بودن $ (4) $ \Leftarrow $ کنش‌های همز... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.28 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.28 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.28 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.29 \item ماشین $ (5) $ \Leftarrow $ نوع کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.30 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.30 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.30 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.31 ...مانع/ موانع $ ( 2 ) $ \Leftarrow $ موانع کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.32 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.32 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.32 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.33 ...ب تعیین شده $ ( 3 ) $ \Leftarrow $ چارچوب کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.34 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.34 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.34 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.35 \item عبور کردن $ (1) $ \Leftarrow $ ادامه‌ی کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.36 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.36 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.36 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.37 \item دنبال کردن $ (1) $ \Leftarrow $ پیشرفت در کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.38 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.38 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.38 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.39 ...اب کردن راه $ ( 3 ) $ \Leftarrow $ انتخاب کنش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.40 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.40 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.40 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.41 ... راهبر/ رهبر $ ( 3 ) $ \Leftarrow $ راهنمای سفر $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.42 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.42 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.42 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. File: images/d.png Graphic file (type QTm) LaTeX Warning: `!h' float specifier changed to `!ht'. ! Illegal unit of measure (pt inserted). \vskip l.60 \vspace{0.6} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [54] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [55] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [56] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [57] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [58] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [59] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [60] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [61] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [62] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [63] ! Missing $ inserted. $ l.125 ...ر اراده بودن $ (1) $ \Leftarrow $ کنشگر، مقاوم... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.126 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.126 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.126 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.127 ...مایه گذاشتن $ (2) $ \Leftarrow $احساسات$ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.128 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.128 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.128 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.129 ...m در مغز بودن $ (1) $ \Leftarrow $ دانش $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.130 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.130 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.130 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.131 ...ار فتح و ظفر $ (1) $ \Leftarrow $ کنشگر $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.132 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.132 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.132 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [64] ! Missing $ inserted. $ l.133 \item پشت بودن $ (1) $ \Leftarrow $ تکیه‌گاه $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! LaTeX Error: Command \end{list} invalid in math mode. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.134 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.134 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.134 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! Missing $ inserted. $ l.134 \end{list} I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. File: images/e.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.146 \vspace{0.3} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [65] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [66] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [67] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [68] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [69] ! Missing $ inserted. $ l.193 ...معامله کردن $ (2) $ \Leftarrow $ مذاکره کردن $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.194 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.194 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.194 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.195 \item بده بستان $ (2) $ \Leftarrow $اقدامات متقا... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.196 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.196 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.196 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.197 \item پول دادن$ (1) $ \Leftarrow $ تعهد دادن $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.198 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.198 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.198 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.199 ...ریداری کردن $ (1) $ \Leftarrow $ به دست آوردن... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.200 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.200 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.200 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.201 ...، مجانی دادن$ (1) $ \Leftarrow $ منفعت بدون م... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.202 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.202 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.202 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [70] ! Missing $ inserted. $ l.203 \item چانه‌زنی $ (1) $ \Leftarrow $ تلاش برای به ... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! LaTeX Error: Command \end{list} invalid in math mode. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.204 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.204 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.204 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! Missing $ inserted. $ l.204 \end{list} I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. File: images/f.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.215 \vspace{0.6} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [71] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [72] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [73] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [74] ! Missing $ inserted. $ l.263 ...عامل سازنده $ (3) $ \Leftarrow $ همکاری‌های ... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.264 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.264 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.264 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.265 ...له $ (1) $، بام $ (1) $ \Leftarrow $اجزای سازه$ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.266 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.266 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.266 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.267 ...ر بی اعتمادی$ (1) $ \Leftarrow $ بی اعتمادی د... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.268 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.268 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.268 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.269 ...رسیدن به بام $ (1) $ \Leftarrow $ همکاری کردن $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.270 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.270 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.270 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.271 \item فضا $ (1) $ \Leftarrow $انگیزش همکاری $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.272 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.272 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.272 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. File: images/g.png Graphic file (type QTm) LaTeX Warning: `!h' float specifier changed to `!ht'. ! Illegal unit of measure (pt inserted). \vskip l.283 \vspace{0.6} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [75] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [76] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [77] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [78] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [79] ! Missing $ inserted. $ l.336 ...tem روشن کردن $ (1) $ \Leftarrow $ اجرای کنش، ع... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.337 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.337 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.337 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.338 \item تنویر $ (1) $ \Leftarrow $اجرای کنش، عامل،... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.339 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.339 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.339 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.340 \item شفافیت$ (1) $ \Leftarrow $ کنش، شیء تاریک $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.341 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.341 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.341 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.342 \item روشن بودن $ (1) $ \Leftarrow $ کنش، شیء تار... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.343 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.343 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.343 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. File: images/h.png Graphic file (type QTm) LaTeX Warning: `!h' float specifier changed to `!ht'. ! Illegal unit of measure (pt inserted). \vskip l.354 \vspace{0.6} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [80] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [81] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [82] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [83] ! Missing $ inserted. $ l.401 ...صفحه‌ی جدید$ (3) $ \Leftarrow $ آغاز همکاری... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.402 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.402 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.402 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.403 \item نشر توهمات$ (2) $ \Leftarrow $ نشر توهمات$ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.404 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.404 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.404 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.405 \item ورق خوردن$ (1) $ \Leftarrow $ تغییر در روابط $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.406 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.406 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.406 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. File: images/i.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.418 \vspace{0.6} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [84] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [85] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.6549pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [86] ! Undefined control sequence. \inddnet l.460 \paragraph*{\inddnet} ا ین استعاره با داشتن $ 4 $ عب... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [87] ! Missing $ inserted. $ l.465 \item برد ـ برد $ (2) $ \Leftarrow $ برد ـ برد، دول... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.466 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.466 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.466 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.467 \item برد ـ باخت $ (1) $ \Leftarrow $ برد ـ باخت، ... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.468 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.468 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.468 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.469 \item فشار تحریم $ (1) $ \Leftarrow $ تحریم $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.470 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.470 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.470 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. File: images/j.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.481 \vspace{0.5} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [88] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [89] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [90] ! Missing $ inserted. $ l.523 ... زندگی مردم $ (1) $ \Leftarrow $ زندگی اقتصاد... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.524 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.524 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.524 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.525 \item چرخ اقتصاد$ (1) $ \Leftarrow $ زندگی اقتصا... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.526 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.526 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.526 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.527 \item چرخیدن $ (1) $ \Leftarrow $ رونق $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.528 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.528 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.528 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.529 \item در چرخش $ (1) $ \Leftarrow $ رونق $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! LaTeX Error: Command \end{list} invalid in math mode. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.530 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.530 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.530 \end{list} Try typing to proceed. If that doesn't work, type X to quit. ! Missing $ inserted. $ l.530 \end{list} I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. File: images/k.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.541 \vspace{0.7} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.67203pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [91] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 14.67203pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [92] ! Missing $ inserted. $ l.583 ...ی غلط سیاسی $ (1) $ \Leftarrow $ صحنه‌سازی س... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.584 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.584 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.584 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.585 ...ارتاید علمی $ (1) $ \Leftarrow $ آپارتاید، خ... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.586 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.586 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.586 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. File: images/l.png Graphic file (type QTm) LaTeX Warning: `!h' float specifier changed to `!ht'. ! Illegal unit of measure (pt inserted). \vskip l.598 \vspace{0.7} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [93] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [94] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [95] ! Missing $ inserted. $ l.641 ...یرهای تحریم $ (1) $ \Leftarrow $ تحریم $ I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.642 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.642 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.642 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing $ inserted. $ l.643 \item گسسته شدن $ (1) $ \Leftarrow $ رفع تحریم‌ه... I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing $ inserted. $ l.644 I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing } inserted. } l.644 I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra }, or forgotten \endgroup. \par ...m \@noitemerr {\@@par }\fi \else {\@@par } \fi l.644 I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. File: images/m.png Graphic file (type QTm) ! Illegal unit of measure (pt inserted). \vskip l.655 \vspace{0.7} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [96] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [97] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [98] ! LaTeX Error: Illegal character in array arg. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.697 \begin{tabular}{ | c | r | P{3 cm} } You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Illegal character in array arg. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.697 \begin{tabular}{ | c | r | P{3 cm} } You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Illegal character in array arg. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.730 \begin{tabular}{ | c | r | P{3 cm} } You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: Illegal character in array arg. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.730 \begin{tabular}{ | c | r | P{3 cm} } You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [99] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [100]) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.05432pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [101] ! Extra \else. \@include ...ediate \closeout \@partaux \fi \else \deadcycles \z@ \@nameuse ... l.173 \include{chap4} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \@include ...\deadcycles \z@ \@nameuse {cp@#1}\fi \let \@auxout \@mainaux l.173 \include{chap4} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \include ...e nested}\@eha \else \@include #1 \fi l.173 \include{chap4} I'm ignoring this; it doesn't match any \if. ("C:\Users\Sareh\Desktop\najme thesis\chap5.tex" فصل 5. ! Undefined control sequence. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{نتیجه‌گیری} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{نتیجه‌گیری} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \@makechapterhead ...mdepth >\m@ne \if@mainmatter \par \huge \@chapapp \spac... l.1 \chapter{نتیجه‌گیری} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@makechapterhead ...p \space {\bf \chapternumber \bf \thechapter } \par \no... l.1 \chapter{نتیجه‌گیری} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [102 ] Overfull \hbox (4.27873pt too wide) in paragraph at lines 18--18 []\EU1/XBZar(2)/bx/n/12 دولت یازدهم برای اقناع مخاطبا ش در زمینه‌ی ایدئولوژی اش به کار گرفته[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.21312pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [103] Overfull \hbox (4.54555pt too wide) in paragraph at lines 25--26 []\EU1/XBZar(2)/m/n/10.95 ابزارهای مفهوم‌سازی مانند ا ارتگرها و مجازها و سایر برچسب‌های واژگانی که به تعامل به استعاره‌های[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.21312pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [104] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 15.21312pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [105] Overfull \hbox (1.00407pt too wide) in paragraph at lines 74--75 [][]$\OMS/cmsy/m/n/10.95 ^^@[]$ \EU1/XBZar(2)/m/n/10.95 تحلیل گفتمان سیاست خارجی هفتمین رئیس‌جمهور ایران با اس فاده از سایر چارچوب‌های[] [] Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [106]) Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [107] ! Extra \else. \@include ...ediate \closeout \@partaux \fi \else \deadcycles \z@ \@nameuse ... l.174 \include{chap5} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \@include ...\deadcycles \z@ \@nameuse {cp@#1}\fi \let \@auxout \@mainaux l.174 \include{chap5} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \include ...e nested}\@eha \else \@include #1 \fi l.174 \include{chap5} I'm ignoring this; it doesn't match any \if. ("C:\Users\Sareh\Desktop\najme thesis\result.tex") LaTeX Font Info: Font shape `EU1/XBZar(2)/m/sl' in size <10.95> not availabl e (Font) Font shape `EU1/XBZar(2)/m/it' tried instead on input line 176. LaTeX Font Info: Font shape `EU1/XBZar(2)/m/it' will be (Font) scaled to size 12.04506pt on input line 176. [107 ] ("C:\Users\Sareh\Desktop\najme thesis\peyvast1.tex" پيوست آ‍. ! Undefined control sequence. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{ضمائم} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \mycustomraggedleft ->\if@LTR \raggedleft \else \raggedright \fi l.1 \chapter{ضمائم} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \@makechapterhead ...mdepth >\m@ne \if@mainmatter \par \huge \@chapapp \spac... l.1 \chapter{ضمائم} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@makechapterhead ...p \space {\bf \chapternumber \bf \thechapter } \par \no... l.1 \chapter{ضمائم} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ) [108 ] ! Extra \else. \@include ...ediate \closeout \@partaux \fi \else \deadcycles \z@ \@nameuse ... l.182 \include{peyvast1} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \@include ...\deadcycles \z@ \@nameuse {cp@#1}\fi \let \@auxout \@mainaux l.182 \include{peyvast1} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \include ...e nested}\@eha \else \@include #1 \fi l.182 \include{peyvast1} I'm ignoring this; it doesn't match any \if. ("C:\Users\Sareh\Desktop\najme thesis\peyvast2.tex") Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [109 ] ("C:\Users\Sareh\Desktop\najme thesis\peyvast3.tex") Package Fancyhdr Warning: \headheight is too small (12.0pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [110 ] ("C:\Users\Sareh\Desktop\najme thesis\references.tex") ("C:\Users\Sareh\Desktop\najme thesis\abstract_en.tex" LaTeX Font Info: Font shape `EU1/TimesNewRoman(0)/m/n' will be (Font) scaled to size 10.95pt on input line 2. LaTeX Font Info: Font shape `EU1/TimesNewRoman(0)/m/n' will be (Font) scaled to size 14.4pt on input line 5. LaTeX Font Info: Font shape `EU1/TimesNewRoman(0)/bx/n' will be (Font) scaled to size 14.4pt on input line 5. ! LaTeX Error: \begin{document} ended by \end{latin}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.12 \end{latin} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Missing } inserted. } l.12 \end{latin} I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing } inserted. } l.12 \end{latin} I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing } inserted. } l.12 \end{latin} I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Extra \endgroup. \endgroup l.12 \end{latin} Things are pretty mixed up, but I think the worst is over. ) [111 ] ("C:\Users\Sareh\Desktop\najme thesis\cover_en.tex" ! LaTeX Error: File `logo' not found. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.5 ^^I^^I\includegraphics{logo} \\ I could not locate the file with any of these extensions: .pdf,.eps,.ps,.png,.jpg,.bmp,.pict,.tif,.psd,.mac,.sga,.tga,.gif Try typing to proceed. If that doesn't work, type X to quit. ! LaTeX Error: There's no line here to end. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.5 ^^I^^I\includegraphics{logo} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Font shape `EU1/TimesNewRoman(0)/m/n' will be (Font) scaled to size 12.0pt on input line 6. ! LaTeX Error: \begin{large} on input line 6 ended by \end{latin}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.7 ^^I\end{latin} Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: \begin{latin} on input line 3 ended by \end{center}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.8 \end{center} Your command was ignored. Type I to replace it with another command, or to continue without it. ) [112 ] ! LaTeX Error: \begin{center} on input line 2 ended by \end{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.192 \end{document} Your command was ignored. Type I to replace it with another command, or to continue without it. ("C:\Users\Sareh\Desktop\najme thesis\maindoc.aux" ("C:\Users\Sareh\Desktop\najme thesis\empty.aux") ("C:\Users\Sareh\Desktop\najme thesis\besm.aux") ("C:\Users\Sareh\Desktop\najme thesis\cover.aux") ("C:\Users\Sareh\Desktop\najme thesis\right.aux") ("C:\Users\Sareh\Desktop\najme thesis\Taied.aux") ("C:\Users\Sareh\Desktop\najme thesis\thanks.aux") ("C:\Users\Sareh\Desktop\najme thesis\abstract_fa.aux") ("C:\Users\Sareh\Desktop\najme thesis\introduction.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap1.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap2.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap3.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap4.aux") ("C:\Users\Sareh\Desktop\najme thesis\chap5.aux") ("C:\Users\Sareh\Desktop\najme thesis\result.aux") ("C:\Users\Sareh\Desktop\najme thesis\peyvast1.aux") ("C:\Users\Sareh\Desktop\najme thesis\peyvast2.aux") ("C:\Users\Sareh\Desktop\najme thesis\peyvast3.aux") ("C:\Users\Sareh\Desktop\najme thesis\references.aux") ("C:\Users\Sareh\Desktop\najme thesis\abstract_en.aux") ("C:\Users\Sareh\Desktop\najme thesis\cover_en.aux")) ) (\end occurred inside a group at level 1) ### semi simple group (level 1) entered at line 2 (\begingroup) ### bottom level Here is how much of TeX's memory you used: 18752 strings out of 430430 304112 string characters out of 3189561 468936 words of memory out of 3000000 21361 multiletter control sequences out of 15000+200000 13252 words of font info for 105 fonts, out of 3000000 for 9000 14 hyphenation exceptions out of 8191 45i,14n,75p,17586b,734s stack positions out of 5000i,500n,10000p,200000b,50000s Output written on maindoc.pdf (127 pages).