This is XeTeX, Version 3.1415926-2.5-0.9999.3 (MiKTeX 2.9 64-bit) (preloaded format=xelatex 2018.5.12) 24 MAY 2018 15:55 entering extended mode **M_A.tex ("D:\هسته ای\Fusion\thesis\latex\persian template-latex\M_A.tex" LaTeX2e <2014/05/01> Babel <3.9k> and hyphenation patterns for 68 languages loaded. ("C:\Program Files\MiKTeX 2.9\tex\latex\base\report.cls" Document Class: report 2007/10/19 v1.4h Standard LaTeX document class ("C:\Program Files\MiKTeX 2.9\tex\latex\base\size10.clo" File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count80 \c@chapter=\count81 \c@section=\count82 \c@subsection=\count83 \c@subsubsection=\count84 \c@paragraph=\count85 \c@subparagraph=\count86 \c@figure=\count87 \c@table=\count88 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\hyperref\hyperref.sty" Package: hyperref 2012/11/06 v6.83m Hypertext links for LaTeX ("C:\Program Files\MiKTeX 2.9\tex\generic\oberdiek\hobsub-hyperref.sty" Package: hobsub-hyperref 2012/04/25 v1.12 Bundle oberdiek, subset hyperref (HO) ("C:\Program Files\MiKTeX 2.9\tex\generic\oberdiek\hobsub-generic.sty" Package: hobsub-generic 2012/04/25 v1.12 Bundle oberdiek, subset generic (HO) Package: hobsub 2012/04/25 v1.12 Construct package bundles (HO) Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO) Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO) Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX not detected. Package: ifvtex 2010/03/01 v1.5 Detect VTeX and its facilities (HO) Package ifvtex Info: VTeX not detected. Package: intcalc 2007/09/27 v1.1 Expandable calculations with integers (HO) Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in PDF mode is not detected. Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO) Package etexcmds Info: Could not find \expanded. (etexcmds) That can mean that you are not using pdfTeX 1.50 or (etexcmds) that some package has redefined \expanded. (etexcmds) In the latter case, load this package earlier. Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO) Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO) Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO ) Package pdftexcmds Info: LuaTeX not detected. Package pdftexcmds Info: pdfTeX >= 1.30 not detected. Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. Package pdftexcmds Info: \pdfdraftmode not found. Package: pdfescape 2011/11/25 v1.13 Implements pdfTeX's escape features (HO) Package: bigintcalc 2012/04/08 v1.3 Expandable calculations on big integers (HO ) Package: bitset 2011/01/30 v1.1 Handle bit-vector datatype (HO) Package: uniquecounter 2011/01/30 v1.2 Provide unlimited unique counter (HO) ) Package hobsub Info: Skipping package `hobsub' (already loaded). Package: letltxmacro 2010/09/02 v1.4 Let assignment for LaTeX macros (HO) Package: hopatch 2011/06/24 v1.1 Wrapper for package hooks (HO) Package: xcolor-patch 2011/01/30 xcolor patch Package: atveryend 2011/06/30 v1.8 Hooks at the very end of document (HO) Package atveryend Info: \enddocument detected (standard20110627). Package: atbegshi 2011/10/05 v1.16 At begin shipout hook (HO) Package: refcount 2011/10/16 v3.4 Data extraction from label references (HO) Package: hycolor 2011/01/30 v1.7 Color options for hyperref/bookmark (HO) ) ("C:\Program Files\MiKTeX 2.9\tex\latex\graphics\keyval.sty" Package: keyval 2014/05/08 v1.15 key=value parser (DPC) \KV@toks@=\toks14 ) ("C:\Program Files\MiKTeX 2.9\tex\generic\ifxetex\ifxetex.sty" Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional ) ("C:\Program Files\MiKTeX 2.9\tex\latex\oberdiek\auxhook.sty" Package: auxhook 2011/03/04 v1.3 Hooks for auxiliary files (HO) ) ("C:\Program Files\MiKTeX 2.9\tex\latex\oberdiek\kvoptions.sty" Package: kvoptions 2011/06/30 v3.11 Key value format for package options (HO) ) \@linkdim=\dimen103 \Hy@linkcounter=\count89 \Hy@pagecounter=\count90 ("C:\Program Files\MiKTeX 2.9\tex\latex\hyperref\pd1enc.def" File: pd1enc.def 2012/11/06 v6.83m Hyperref: PDFDocEncoding definition (HO) ) \Hy@SavedSpaceFactor=\count91 ("C:\Program Files\MiKTeX 2.9\tex\latex\00miktex\hyperref.cfg" File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive ) Package hyperref Info: Hyper figures OFF on input line 4443. Package hyperref Info: Link nesting OFF on input line 4448. Package hyperref Info: Hyper index ON on input line 4451. Package hyperref Info: Plain pages OFF on input line 4458. Package hyperref Info: Backreferencing OFF on input line 4463. Package hyperref Info: Implicit mode ON; LaTeX internals redefined. Package hyperref Info: Bookmarks ON on input line 4688. \c@Hy@tempcnt=\count92 ("C:\Program Files\MiKTeX 2.9\tex\latex\url\url.sty" \Urlmuskip=\muskip10 Package: url 2013/09/16 ver 3.4 Verb mode for urls, etc. ) LaTeX Info: Redefining \url on input line 5041. \XeTeXLinkMargin=\dimen104 \Fld@menulength=\count93 \Field@Width=\dimen105 \Fld@charsize=\dimen106 Package hyperref Info: Hyper figures OFF on input line 6295. Package hyperref Info: Link nesting OFF on input line 6300. Package hyperref Info: Hyper index ON on input line 6303. Package hyperref Info: backreferencing OFF on input line 6310. Package hyperref Info: Link coloring OFF on input line 6315. Package hyperref Info: Link coloring with OCG OFF on input line 6320. Package hyperref Info: PDF/A mode OFF on input line 6325. LaTeX Info: Redefining \ref on input line 6365. LaTeX Info: Redefining \pageref on input line 6369. \Hy@abspage=\count94 \c@Item=\count95 \c@Hfootnote=\count96 ) Package hyperref Message: Driver (autodetected): hxetex. ("C:\Program Files\MiKTeX 2.9\tex\latex\hyperref\hxetex.def" File: hxetex.def 2012/11/06 v6.83m Hyperref driver for XeTeX ("C:\Program Files\MiKTeX 2.9\tex\latex\hyperref\puenc.def" File: puenc.def 2012/11/06 v6.83m Hyperref: PDF Unicode definition (HO) ) ("C:\Program Files\MiKTeX 2.9\tex\generic\oberdiek\stringenc.sty" Package: stringenc 2011/12/02 v1.10 Convert strings between diff. encodings (HO ) ) \pdfm@box=\box26 \c@Hy@AnnotLevel=\count97 \HyField@AnnotCount=\count98 \Fld@listcount=\count99 \c@bookmark@seq@number=\count100 ("C:\Program Files\MiKTeX 2.9\tex\latex\oberdiek\rerunfilecheck.sty" Package: rerunfilecheck 2011/04/15 v1.7 Rerun checks for auxiliary files (HO) Package rerunfilecheck Info: Feature \pdfmdfivesum is not available (rerunfilecheck) (e.g. pdfTeX or LuaTeX with package `pdftexcmds'). (rerunfilecheck) Therefore file contents cannot be checked efficien tly (rerunfilecheck) and the loading of the package is aborted. ) \Hy@SectionHShift=\skip43 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\amscls\amsthm.sty" Package: amsthm 2004/08/06 v2.20 \thm@style=\toks15 \thm@bodyfont=\toks16 \thm@headfont=\toks17 \thm@notefont=\toks18 \thm@headpunct=\toks19 \thm@preskip=\skip44 \thm@postskip=\skip45 \thm@headsep=\skip46 \dth@everypar=\toks20 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsmath.sty" Package: amsmath 2013/01/14 v2.14 AMS math features \@mathmargin=\skip47 For additional information on amsmath, use the `?' option. ("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amstext.sty" Package: amstext 2000/06/29 v2.01 ("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsgen.sty" File: amsgen.sty 1999/11/30 v2.0 \@emptytoks=\toks21 \ex@=\dimen107 )) ("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsbsy.sty" Package: amsbsy 1999/11/29 v1.2d \pmbraise@=\dimen108 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsopn.sty" Package: amsopn 1999/12/14 v2.01 operator names ) \inf@bad=\count101 LaTeX Info: Redefining \frac on input line 210. \uproot@=\count102 \leftroot@=\count103 LaTeX Info: Redefining \overline on input line 306. \classnum@=\count104 \DOTSCASE@=\count105 LaTeX Info: Redefining \ldots on input line 378. LaTeX Info: Redefining \dots on input line 381. LaTeX Info: Redefining \cdots on input line 466. \Mathstrutbox@=\box27 \strutbox@=\box28 \big@size=\dimen109 LaTeX Font Info: Redeclaring font encoding OML on input line 566. LaTeX Font Info: Redeclaring font encoding OMS on input line 567. \macc@depth=\count106 \c@MaxMatrixCols=\count107 \dotsspace@=\muskip11 \c@parentequation=\count108 \dspbrk@lvl=\count109 \tag@help=\toks22 \row@=\count110 \column@=\count111 \maxfields@=\count112 \andhelp@=\toks23 \eqnshift@=\dimen110 \alignsep@=\dimen111 \tagshift@=\dimen112 \tagwidth@=\dimen113 \totwidth@=\dimen114 \lineht@=\dimen115 \@envbody=\toks24 \multlinegap=\skip48 \multlinetaggap=\skip49 \mathdisplay@stack=\toks25 LaTeX Info: Redefining \[ on input line 2665. LaTeX Info: Redefining \] on input line 2666. ) ("C:\Program Files\MiKTeX 2.9\tex\latex\amsfonts\amsfonts.sty" Package: amsfonts 2013/01/14 v3.01 Basic AMSFonts support \symAMSa=\mathgroup4 \symAMSb=\mathgroup5 LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold' (Font) U/euf/m/n --> U/euf/b/n on input line 106. ) ("C:\Program Files\MiKTeX 2.9\tex\latex\amsfonts\amssymb.sty" Package: amssymb 2013/01/14 v3.01 AMS font symbols ) ("C:\Program Files\MiKTeX 2.9\tex\latex\jknappen\mathrsfs.sty" Package: mathrsfs 1996/01/01 Math RSFS package v1.0 (jk) \symrsfs=\mathgroup6 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\fancyhdr\fancyhdr.sty" \fancy@headwidth=\skip50 \f@ncyO@elh=\skip51 \f@ncyO@erh=\skip52 \f@ncyO@olh=\skip53 \f@ncyO@orh=\skip54 \f@ncyO@elf=\skip55 \f@ncyO@erf=\skip56 \f@ncyO@olf=\skip57 \f@ncyO@orf=\skip58 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\sectsty\sectsty.sty" Package: sectsty 2002/02/25 v2.0.2 Commands to change all sectional heading sty les ) ("C:\Program Files\MiKTeX 2.9\tex\latex\fancybox\fancybox.sty" Package: fancybox 2010/05/15 1.4 Style option: `fancybox' v1.4 <2010/05/15> (tvz) \@fancybox=\box29 \shadowsize=\dimen116 \@Sbox=\box30 \do@VerbBox=\toks26 \the@fancyput=\toks27 \this@fancyput=\toks28 \EndVerbatimTokens=\toks29 \Verbatim@Outfile=\write3 \Verbatim@Infile=\read1 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\base\makeidx.sty" Package: makeidx 2000/03/29 v1.0m Standard LaTeX package ) ("C:\Program Files\MiKTeX 2.9\tex\latex\tools\multicol.sty" Package: multicol 2014/06/19 v1.8f multicolumn formatting (FMi) \c@tracingmulticols=\count113 \mult@box=\box31 \multicol@leftmargin=\dimen117 \c@unbalance=\count114 \c@collectmore=\count115 \doublecol@number=\count116 \multicoltolerance=\count117 \multicolpretolerance=\count118 \full@width=\dimen118 \page@free=\dimen119 \premulticols=\dimen120 \postmulticols=\dimen121 \multicolsep=\skip59 \multicolbaselineskip=\skip60 \partial@page=\box32 \last@line=\box33 \maxbalancingoverflow=\dimen122 \mult@rightbox=\box34 \mult@grightbox=\box35 \mult@gfirstbox=\box36 \mult@firstbox=\box37 \@tempa=\box38 \@tempa=\box39 \@tempa=\box40 \@tempa=\box41 \@tempa=\box42 \@tempa=\box43 \@tempa=\box44 \@tempa=\box45 \@tempa=\box46 \@tempa=\box47 \@tempa=\box48 \@tempa=\box49 \@tempa=\box50 \@tempa=\box51 \@tempa=\box52 \@tempa=\box53 \@tempa=\box54 \c@columnbadness=\count119 \c@finalcolumnbadness=\count120 \last@try=\dimen123 \multicolovershoot=\dimen124 \multicolundershoot=\dimen125 \mult@nat@firstbox=\box55 \colbreak@box=\box56 \mc@col@check@num=\count121 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\tools\verbatim.sty" Package: verbatim 2003/08/22 v1.5q LaTeX2e package for verbatim enhancements \every@verbatim=\toks30 \verbatim@line=\toks31 \verbatim@in@stream=\read2 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\graphics\graphicx.sty" Package: graphicx 2014/04/25 v1.0g Enhanced LaTeX Graphics (DPC,SPQR) ("C:\Program Files\MiKTeX 2.9\tex\latex\graphics\graphics.sty" Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) ("C:\Program Files\MiKTeX 2.9\tex\latex\graphics\trig.sty" Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) ("C:\Program Files\MiKTeX 2.9\tex\latex\00miktex\graphics.cfg" File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive ) Package graphics Info: Driver file: xetex.def on input line 91. ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xetex-def\xetex.def" File: xetex.def 2014/04/28 v4.01 LaTeX color/graphics driver for XeTeX (RRM/JK) )) \Gin@req@height=\dimen126 \Gin@req@width=\dimen127 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\tocbibind\tocbibind.sty" Package: tocbibind 2010/10/13 v1.5k extra ToC listings Package tocbibind Info: The document has chapter divisions on input line 50. Package tocbibind Note: Using chapter style headings, unless overridden. ) ("C:\Program Files\MiKTeX 2.9\tex\latex\geometry\geometry.sty" Package: geometry 2010/09/12 v5.6 Page Geometry \Gm@cnth=\count122 \Gm@cntv=\count123 \c@Gm@tempcnt=\count124 \Gm@bindingoffset=\dimen128 \Gm@wd@mp=\dimen129 \Gm@odd@mp=\dimen130 \Gm@even@mp=\dimen131 \Gm@layoutwidth=\dimen132 \Gm@layoutheight=\dimen133 \Gm@layouthoffset=\dimen134 \Gm@layoutvoffset=\dimen135 \Gm@dimlist=\toks32 ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xetexconfig\geometry.cfg")) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\xepersian.sty" Package: xepersian 2014/07/13 v14.0 Persian typesetting in XeLaTeX ("C:\Program Files\MiKTeX 2.9\tex\latex\fontspec\fontspec.sty" Package: fontspec 2014/06/21 v2.4a Font selection for XeLaTeX and LuaLaTeX ("C:\Program Files\MiKTeX 2.9\tex\latex\l3kernel\expl3.sty" Package: expl3 2014/06/10 v5105 L3 programming layer (loader) ("C:\Program Files\MiKTeX 2.9\tex\latex\l3kernel\expl3-code.tex" Package: expl3 2014/06/10 v5105 L3 programming layer (code) L3 Module: l3bootstrap 2014/05/26 v4889 L3 Bootstrap code ("C:\Program Files\MiKTeX 2.9\tex\latex\misc\etex.sty" Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB) \et@xins=\count125 ) L3 Module: l3names 2014/06/02 v4993 L3 Namespace for primitives L3 Module: l3basics 2014/06/04 v5033 L3 Basic definitions L3 Module: l3expan 2014/04/30 v4712 L3 Argument expansion L3 Module: l3tl 2014/06/06 v5070 L3 Token lists L3 Module: l3seq 2014/04/30 v4712 L3 Sequences and stacks L3 Module: l3int 2014/05/31 v4966 L3 Integers \c_max_int=\count126 \l_tmpa_int=\count127 \l_tmpb_int=\count128 \g_tmpa_int=\count129 \g_tmpb_int=\count130 L3 Module: l3quark 2014/05/26 v4889 L3 Quarks L3 Module: l3prg 2014/05/04 v4728 L3 Control structures \g__prg_map_int=\count131 L3 Module: l3clist 2014/05/04 v4728 L3 Comma separated lists L3 Module: l3token 2014/05/26 v4889 L3 Experimental token manipulation L3 Module: l3prop 2014/04/30 v4712 L3 Property lists L3 Module: l3msg 2014/05/30 v4943 L3 Messages L3 Module: l3file 2014/05/26 v4890 L3 File and I/O operations \l_iow_line_count_int=\count132 \l__iow_target_count_int=\count133 \l__iow_current_line_int=\count134 \l__iow_current_word_int=\count135 \l__iow_current_indentation_int=\count136 L3 Module: l3skip 2014/05/31 v4972 L3 Dimensions and skips \c_zero_dim=\dimen136 \c_max_dim=\dimen137 \l_tmpa_dim=\dimen138 \l_tmpb_dim=\dimen139 \g_tmpa_dim=\dimen140 \g_tmpb_dim=\dimen141 \c_zero_skip=\skip61 \c_max_skip=\skip62 \l_tmpa_skip=\skip63 \l_tmpb_skip=\skip64 \g_tmpa_skip=\skip65 \g_tmpb_skip=\skip66 \c_zero_muskip=\muskip12 \c_max_muskip=\muskip13 \l_tmpa_muskip=\muskip14 \l_tmpb_muskip=\muskip15 \g_tmpa_muskip=\muskip16 \g_tmpb_muskip=\muskip17 L3 Module: l3keys 2014/06/08 v5093 L3 Key-value interfaces \g__keyval_level_int=\count137 \l_keys_choice_int=\count138 L3 Module: l3fp 2014/04/30 v4712 L3 Floating points \c__fp_leading_shift_int=\count139 \c__fp_middle_shift_int=\count140 \c__fp_trailing_shift_int=\count141 \c__fp_big_leading_shift_int=\count142 \c__fp_big_middle_shift_int=\count143 \c__fp_big_trailing_shift_int=\count144 \c__fp_Bigg_leading_shift_int=\count145 \c__fp_Bigg_middle_shift_int=\count146 \c__fp_Bigg_trailing_shift_int=\count147 L3 Module: l3box 2014/05/31 v4974 L3 Experimental boxes \c_empty_box=\box57 \l_tmpa_box=\box58 \l_tmpb_box=\box59 \g_tmpa_box=\box60 \g_tmpb_box=\box61 L3 Module: l3coffins 2014/05/28 v4899 L3 Coffin code layer \l__coffin_internal_box=\box62 \l__coffin_internal_dim=\dimen142 \l__coffin_offset_x_dim=\dimen143 \l__coffin_offset_y_dim=\dimen144 \l__coffin_x_dim=\dimen145 \l__coffin_y_dim=\dimen146 \l__coffin_x_prime_dim=\dimen147 \l__coffin_y_prime_dim=\dimen148 \c_empty_coffin=\box63 \l__coffin_aligned_coffin=\box64 \l__coffin_aligned_internal_coffin=\box65 \l_tmpa_coffin=\box66 \l_tmpb_coffin=\box67 \l__coffin_display_coffin=\box68 \l__coffin_display_coord_coffin=\box69 \l__coffin_display_pole_coffin=\box70 \l__coffin_display_offset_dim=\dimen149 \l__coffin_display_x_dim=\dimen150 \l__coffin_display_y_dim=\dimen151 L3 Module: l3color 2014/04/30 v4712 L3 Experimental color support L3 Module: l3candidates 2014/05/31 v4972 L3 Experimental additions to l3kernel \l__box_top_dim=\dimen152 \l__box_bottom_dim=\dimen153 \l__box_left_dim=\dimen154 \l__box_right_dim=\dimen155 \l__box_top_new_dim=\dimen156 \l__box_bottom_new_dim=\dimen157 \l__box_left_new_dim=\dimen158 \l__box_right_new_dim=\dimen159 \l__box_internal_box=\box71 \l__coffin_bounding_shift_dim=\dimen160 \l__coffin_left_corner_dim=\dimen161 \l__coffin_right_corner_dim=\dimen162 \l__coffin_bottom_corner_dim=\dimen163 \l__coffin_top_corner_dim=\dimen164 \l__coffin_scaled_total_height_dim=\dimen165 \l__coffin_scaled_width_dim=\dimen166 ) ("C:\Program Files\MiKTeX 2.9\tex\latex\l3kernel\l3xdvipdfmx.def" File: l3xdvidpfmx.def 2014/05/06 v4748 L3 Experimental driver: xdvipdfmx )) ("C:\Program Files\MiKTeX 2.9\tex\latex\l3packages\xparse\xparse.sty" Package: xparse 2014/06/10 v5105 L3 Experimental document command parser \l__xparse_current_arg_int=\count148 \l__xparse_m_args_int=\count149 \l__xparse_mandatory_args_int=\count150 \l__xparse_processor_int=\count151 \l__xparse_v_nesting_int=\count152 ) \l_fontspec_script_int=\count153 \l_fontspec_language_int=\count154 \l_fontspec_strnum_int=\count155 \l__fontspec_tmpa_dim=\dimen167 \l__fontspec_tmpb_dim=\dimen168 \l__fontspec_tmpc_dim=\dimen169 Variant \tl_gset:cV already defined; not changing it on line 71 ("C:\Program Files\MiKTeX 2.9\tex\latex\fontspec\fontspec-patches.sty" Package: fontspec-patches 2014/06/21 v2.4a Font selection for XeLaTeX and LuaLa TeX LaTeX Info: Redefining \em on input line 38. LaTeX Info: Redefining \emph on input line 46. LaTeX Info: Redefining \- on input line 49. ************************************************* * LaTeX warning: "xparse/redefine-command" * * Redefining document command \oldstylenums with arg. spec. 'm' on line 144. ************************************************* ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \liningnums with arg. spec. 'm' on line 148. ................................................. ) ("C:\Program Files\MiKTeX 2.9\tex\latex\fontspec\fontspec-xetex.sty" Package: fontspec-xetex 2014/06/21 v2.4a Font selection for XeLaTeX and LuaLaTe X ("C:\Program Files\MiKTeX 2.9\tex\latex\base\fontenc.sty" Package: fontenc 2005/09/27 v1.99g Standard LaTeX package ("C:\Program Files\MiKTeX 2.9\tex\latex\euenc\eu1enc.def" File: eu1enc.def 2010/05/27 v0.1h Experimental Unicode font encodings ) LaTeX Font Info: Try loading font information for EU1+lmr on input line 100. ("C:\Program Files\MiKTeX 2.9\tex\latex\euenc\eu1lmr.fd" File: eu1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern )) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xunicode\xunicode.sty" File: xunicode.sty 2011/09/09 v0.981 provides access to latin accents and many other characters in Unicode lower plane ("C:\Program Files\MiKTeX 2.9\tex\latex\tipa\t3enc.def" File: t3enc.def 2001/12/31 T3 encoding LaTeX Font Info: Try loading font information for EU1+lmss on input line 357 . ("C:\Program Files\MiKTeX 2.9\tex\latex\euenc\eu1lmss.fd" File: eu1lmss.fd 2009/10/30 v1.6 Font defs for Latin Modern )) \tipaTiiicode=\count156 \tipasavetokens=\toks33 \tipachecktokens=\toks34 ) ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \fontspec with arg. spec. 'O{}mO{}' on line 41. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmainfont with arg. spec. 'O{}mO{}' on line 47. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsansfont with arg. spec. 'O{}mO{}' on line 53. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmonofont with arg. spec. 'O{}mO{}' on line 59. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathrm with arg. spec. 'O{}mO{}' on line 68. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setboldmathrm with arg. spec. 'O{}mO{}' on line . 72. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsf with arg. spec. 'O{}mO{}' on line 76. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathtt with arg. spec. 'O{}mO{}' on line 80. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfamily with arg. spec. 'mO{}mO{}' on line . 99. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontface with arg. spec. 'mO{}mO{}' on line . 103. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \defaultfontfeatures with arg. spec. 't+om' on . line 112. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \addfontfeatures with arg. spec. 'm' on line 170. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfeature with arg. spec. 'mm' on line 181. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newAATfeature with arg. spec. 'mmmm' on line 189. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newopentypefeature with arg. spec. 'mmm' on line . 197. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeature with arg. spec. 'mm' on line . 226. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeatureoption with arg. spec. 'mmm' on . line 228. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontscript with arg. spec. 'mm' on line 233. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontlanguage with arg. spec. 'mm' on line 259. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \DeclareFontsExtensions with arg. spec. 'm' on . line 279. ................................................. Variant \prop_gput:cnV already defined; not changing it on line 662 Variant \prop_gput:cnx already defined; not changing it on line 663 \l__fontspec_tmp_int=\count157 LaTeX Info: Redefining \itshape on input line 2193. LaTeX Info: Redefining \slshape on input line 2198. LaTeX Info: Redefining \scshape on input line 2203. LaTeX Info: Redefining \upshape on input line 2208. ("C:\Program Files\MiKTeX 2.9\tex\latex\fontspec\fontspec.cfg"))) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\xepersian-persiancal.sty" Package: xepersian-persiancal 2012/07/25 v0.2 provides Persian calendar \XePersian@i=\count158 \XePersian@y=\count159 \XePersian@m=\count160 \XePersian@d=\count161 \XePersian@latini=\count162 \XePersian@persiani=\count163 \XePersian@latinii=\count164 \XePersian@persianii=\count165 \XePersian@latiniii=\count166 \XePersian@persianiii=\count167 \XePersian@latiniv=\count168 \XePersian@persianiv=\count169 \XePersian@latinv=\count170 \XePersian@persianv=\count171 \XePersian@latinvi=\count172 \XePersian@persianvi=\count173 \XePersian@latinvii=\count174 \XePersian@persianvii=\count175 \XePersian@latinviii=\count176 \XePersian@persianviii=\count177 \XePersian@latinix=\count178 \XePersian@persianix=\count179 \XePersian@latinx=\count180 \XePersian@persianx=\count181 \XePersian@latinxi=\count182 \XePersian@persianxi=\count183 \XePersian@latinxii=\count184 \XePersian@persianxii=\count185 \XePersian@persianxiii=\count186 \XePersian@temp=\count187 \XePersian@temptwo=\count188 \XePersian@tempthree=\count189 \XePersian@yModHundred=\count190 \XePersian@thirtytwo=\count191 \XePersian@dn=\count192 \XePersian@sn=\count193 \XePersian@mminusone=\count194 ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\xepersian-mathsdigitspec.st y" Package: xepersian-mathsdigitspec 2014/07/13 v1.0.7 Unicode Persian maths digit s in XeLaTeX ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathbf with arg. spec. 'm' on line 145. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathit with arg. spec. 'm' on line 153. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathrm with arg. spec. 'm' on line 161. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathsf with arg. spec. 'm' on line 169. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathtt with arg. spec. 'm' on line 177. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsfdigitfont with arg. spec. 'O{}m' on line . 207. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathttdigitfont with arg. spec. 'O{}m' on line . 212. ................................................. ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\bidi.sty" Package: bidi 2014/07/08 v15.0 Bidirectional typesetting in plain TeX and LaTeX **************************************************** * * bidi package (Bidirectional typesetting in * plain TeX and LaTeX, using XeTeX engine) * * Description: A convenient interface for * typesetting bidirectional texts in plain TeX * and LaTeX. The package includes adaptations * for use with many other commonly-used packages. * * Copyright © 2009–2014 Vafa Khalighi * * 2014/07/08, v15.0 * * License: LaTeX Project Public License, version * 1.3c or higher (your choice) * * Location on CTAN: /macros/xetex/latex/bidi * * Issue tracker: http://sourceforge.net/p/bidi/tickets * * Support: persian-tex@tug.org **************************************************** ("C:\Program Files\MiKTeX 2.9\tex\latex\iftex\iftex.sty" Package: iftex 2013/04/04 v0.2 Provides if(tex) conditional for PDFTeX, XeTeX, and LuaTeX ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\biditools.sty" Package: biditools 2013/04/10 v0.2 Programming tools for bidi package ) ("C:\Program Files\MiKTeX 2.9\tex\latex\oberdiek\zref-abspage.sty" Package: zref-abspage 2012/04/04 v2.24 Module abspage for zref (HO) ("C:\Program Files\MiKTeX 2.9\tex\latex\oberdiek\zref-base.sty" Package: zref-base 2012/04/04 v2.24 Module base for zref (HO) Package zref Info: New property list: main on input line 759. Package zref Info: New property: default on input line 760. Package zref Info: New property: page on input line 761. ) \c@abspage=\count195 Package zref Info: New property: abspage on input line 62. ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\latex-xetex-bidi.def" File: latex-xetex-bidi.def 2013/10/10 v1.1.5 bidi adaptations for `latex.ltx' f or XeTeX engine \bidi@n@everypar=\toks35 ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\footnote-xetex-bidi.def" File: footnote-xetex-bidi.def 2013/04/26 v0.8 bidi footnote macros for XeTeX en gine \c@footdir@label=\count196 \footdir@toks=\toks36 ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\report-xetex-bidi.def" File: report-xetex-bidi.def 2011/08/26 v0.6 bidi adaptations for standard repor t class for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\amsmath-xetex-bidi.def" File: amsmath-xetex-bidi.def 2013/09/23 v0.8 bidi adaptations for amsmath packa ge for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\amstext-xetex-bidi.def" File: amstext-xetex-bidi.def 2013/04/04 v0.1 bidi adaptations for amstext packa ge for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\amsthm-xetex-bidi.def" File: amsthm-xetex-bidi.def 2010/07/25 v0.1 bidi adaptations for amsthm package for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\graphicx-xetex-bidi.def" File: graphicx-xetex-bidi.def 2012/01/01 v0.4 bidi adaptations for graphicx pac kage for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\geometry-xetex-bidi.def" File: geometry-xetex-bidi.def 2013/04/01 v0.1 bidi adaptations for geometry pac kage for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\hyperref-xetex-bidi.def" File: hyperref-xetex-bidi.def 2013/04/08 v0.7 bidi adaptations for hyperref pac kage for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\fancybox-xetex-bidi.def" File: fancybox-xetex-bidi.def 2013/05/01 v0.1 bidi adaptations for fancybox pac kage for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\fancyhdr-xetex-bidi.def" File: fancyhdr-xetex-bidi.def 2012/04/18 v0.4 bidi adaptations for fancyhdr pac kage for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\multicol-xetex-bidi.def" File: multicol-xetex-bidi.def 2014/06/26 v0.5 bidi adaptations for multicol pac kage for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\tocbibind-xetex-bidi.def" File: tocbibind-xetex-bidi.def 2012/12/12 v0.3 bidi adaptations for tocbibind p ackage for XeTeX engine )) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\bidi\loadingorder-xetex-bidi.def" File: loadingorder-xetex-bidi.def 2013/05/22 v0.95 making sure that bidi is the last package loaded )) **************************************************** * * xepersian package (Persian for LaTeX, using XeTeX engine) * * Description: The package supports Persian * typesetting, using fonts provided in the * distribution. * * Copyright © 2008–2013 Vafa Khalighi * * v14.0, 2014/07/13 * * License: LaTeX Project Public License, version * 1.3c or higher (your choice) * * Location on CTAN: /macros/xetex/latex/xepersian * * Issue tracker: https://github.com/vafa/xepersian/issues * * Support: persian-tex@tug.org **************************************************** ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \settextfont with arg. spec. 'O{}m' on line 110. ................................................. \g__file_internal_ior=\read3 \g__fontspec_family_persian-modern-regular_int=\count197 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-regular(0)' created for font . 'persian-modern-regular' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,BoldFont={p ersian-modern-bold},BoldItalicFont={persian-modern-bolditalic},ItalicFont={pers ian-modern-italic},SlantedFont={persian-modern-oblique},BoldSlantedFont={persia n-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-regular]/OT:script=arab;language=FAR;mapping=parsidigits; " . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'bold' with NFSS spec.: . <->"[persian-modern-bold]/OT:script=arab;language=FAR;mapping=parsidigits;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . . . * 'italic' with NFSS spec.: . . <->"[persian-modern-italic]/OT:script=arab;language=FAR;mapping=parsidigits;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . . <->"[persian-modern-oblique]/OT:script=arab;language=FAR;mapping=parsidigits; " . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'bold italic' with NFSS spec.: . . <->"[persian-modern-bolditalic]/OT:script=arab;language=FAR;mapping=parsidigi ts;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . . <->"[persian-modern-boldoblique]/OT:script=arab;language=FAR;mapping=parsidig its;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . ................................................. ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-regular(1)' created for font . 'persian-modern-regular' with options . [Mapping=parsidigits,ExternalLocation,BoldFont={persian-modern-bold},BoldItal icFont={persian-modern-bolditalic},ItalicFont={persian-modern-italic},SlantedFo nt={persian-modern-oblique},BoldSlantedFont={persian-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-regular]/OT:script=latn;language=DFLT;mapping=parsidigits ;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'bold' with NFSS spec.: . . <->"[persian-modern-bold]/OT:script=latn;language=DFLT;mapping=parsidigits;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . . . * 'italic' with NFSS spec.: . . <->"[persian-modern-italic]/OT:script=latn;language=DFLT;mapping=parsidigits; " . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . . <->"[persian-modern-oblique]/OT:script=latn;language=DFLT;mapping=parsidigits ;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'bold italic' with NFSS spec.: . . <->"[persian-modern-bolditalic]/OT:script=latn;language=DFLT;mapping=parsidig its;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . . <->"[persian-modern-boldoblique]/OT:script=latn;language=DFLT;mapping=parsidi gits;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . ................................................. Package xepersian-mathsdigitspec Info: DefiningthedefaultPersianmathsdigitsfont as'persian-modern-regular' on input line 112. \symOPERATORS=\mathgroup7 \symnew@mathbf@font@digits=\mathgroup8 \symnew@mathit@font@digits=\mathgroup9 \symnew@mathrm@font@digits=\mathgroup10 ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setlatintextfont with arg. spec. 'O{}m' on line . 121. ................................................. \g__fontspec_family_lmroman10-regular_int=\count198 ................................................. . fontspec info: "defining-font" . . Font family 'lmroman10-regular(0)' created for font 'lmroman10-regular' with . options . [Mapping=tex-text,ExternalLocation,BoldFont={lmroman10-bold},BoldItalicFont={ lmroman10-bolditalic},ItalicFont={lmroman10-italic},SmallCapsFont={lmromancaps1 0-regular},SlantedFont={lmromanslant10-regular},BoldSlantedFont={lmromanslant10 -bold}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"[lmroman10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . . * 'small caps' with NFSS spec.: . <->"[lmromancaps10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . and font adjustment code: . . . * 'bold' with NFSS spec.: . <->"[lmroman10-bold]/OT:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold small caps' with NFSS spec.: . <->"[lmromancaps10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . and font adjustment code: . . . * 'italic' with NFSS spec.: . <->"[lmroman10-italic]/OT:script=latn;language=DFLT;mapping=tex-text;" . . * 'small caps' with NFSS spec.: . <->"[lmromancaps10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . . <->"[lmromanslant10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . . * 'small caps' with NFSS spec.: . <->"[lmromancaps10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . and font adjustment code: . . . * 'bold italic' with NFSS spec.: . <->"[lmroman10-bolditalic]/OT:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold small caps' with NFSS spec.: . <->"[lmromancaps10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . <->"[lmromanslant10-bold]/OT:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold small caps' with NFSS spec.: . <->"[lmromancaps10-regular]/OT:script=latn;language=DFLT;mapping=tex-text;" . and font adjustment code: . ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \defpersianfont with arg. spec. 'mO{}m' on line . 133. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \deflatinfont with arg. spec. 'mO{}m' on line 142. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpersiansansfont with arg. spec. 'O{}m' on line . 176. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpersianmonofont with arg. spec. 'O{}m' on line . 180. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setnavarfont with arg. spec. 'O{}m' on line 184. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpookfont with arg. spec. 'O{}m' on line 188. ................................................. \g__fontspec_family_persian-modern-outline_int=\count199 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-outline(0)' created for font . 'persian-modern-outline' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,ItalicFont= {persian-modern-italicoutline},SlantedFont={persian-modern-obliqueoutline}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-outline]/OT:script=arab;language=FAR;mapping=parsidigits; " . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'italic' with NFSS spec.: . . <->"[persian-modern-italicoutline]/OT:script=arab;language=FAR;mapping=parsid igits;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . . <->"[persian-modern-obliqueoutline]/OT:script=arab;language=FAR;mapping=parsi digits;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsayehfont with arg. spec. 'O{}m' on line 193. ................................................. \g__fontspec_family_persian-modern-shadow_int=\count200 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-shadow(0)' created for font . 'persian-modern-shadow' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,ItalicFont= {persian-modern-italicshadow},SlantedFont={persian-modern-obliqueshadow}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-shadow]/OT:script=arab;language=FAR;mapping=parsidigits;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'italic' with NFSS spec.: . . <->"[persian-modern-italicshadow]/OT:script=arab;language=FAR;mapping=parsidi gits;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'sl/,' with NFSS spec.: . . <->"[persian-modern-obliqueshadow]/OT:script=arab;language=FAR;mapping=parsid igits;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setiranicfont with arg. spec. 'O{}m' on line 198. ................................................. \g__fontspec_family_persian-modern-oblique_int=\count201 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-oblique(0)' created for font . 'persian-modern-oblique' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,BoldFont={p ersian-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-oblique]/OT:script=arab;language=FAR;mapping=parsidigits; " . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'bold' with NFSS spec.: . . <->"[persian-modern-boldoblique]/OT:script=arab;language=FAR;mapping=parsidig its;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . ................................................. ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\loadingorder-xepersian.def" File: loadingorder-xepersian.def 2012/01/01 v0.3 making sure that xepersian is the last package loaded ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\fontspec-xetex-xepersian.de f" File: fontspec-xetex-xepersian.def 2014/10/07 v0.1 fixes for fontspec-xetex pac kage ************************************************* * LaTeX warning: "xparse/redefine-command" * * Redefining document command \aliasfontfeature with arg. spec. 'mm' on line * 73. ************************************************* ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\footnote-xepersian.def" File: footnote-xepersian.def 2013/04/26 v0.4 footnote macros for xepersian pack age ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\hyperref-xepersian.def" File: hyperref-xepersian.def 2013/04/09 v0.5 bilingual captions for hyperref pa ckage ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\report-xepersian.def" File: report-xepersian.def 2010/07/25 v0.2 adaptations for standard report clas s ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\localise-xepersian.def" File: localise-xepersian.def 2014/07/10 v0.2b Persian localisation of LaTeX2e ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\latex-localise-commands-xep ersian.def" File: latex-localise-commands-xepersian.def 2014/02/05 v0.3 Persian localisatio n of LaTeX2e commands ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\xepersian-localise-commands -xepersian.def" File: xepersian-localise-commands-xepersian.def 2012/07/25 v0.2 Persian localis ation of XePersian commands ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\latex-localise-environments -xepersian.def" File: latex-localise-environments-xepersian.def 2010/07/25 v0.2 Persian localis ation of LaTeX2e environments ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\xepersian-localise-environm ents-xepersian.def" File: xepersian-localise-environments-xepersian.def 2010/07/25 v0.1 Persian loc alisation of XePersian and bidi environments ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\latex-localise-messages-xep ersian.def" File: latex-localise-messages-xepersian.def 2011/03/01 v0.1 localising LaTeX2e messages ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\latex-localise-misc-xepersi an.def" File: latex-localise-misc-xepersian.def 2012/01/01 v0.2 miscellaneous Persian l ocalisation of LaTeX2e ) ("C:\Program Files\MiKTeX 2.9\tex\xelatex\xepersian\packages-localise-xepersian .def" File: packages-localise-xepersian.def 2013/04/24 v0.2 localising LaTeX2e Packag es ))) Package Fancyhdr Warning: \fancyhead's `E' option without twoside option is use less on input line 27. Package Fancyhdr Warning: \fancyhead's `E' option without twoside option is use less on input line 29. ************************************************* * fontspec warning: "language-not-exist" * * Language 'Parsi' not available for font 'B Zar' with script 'Parsi'. * 'Default' language used instead. ************************************************* Normal \count register pool exhausted, switching to extended pool. \g__fontspec_family_BZar_int=\count277 ................................................. . fontspec info: "no-font-shape" . . Could not resolve font B Zar/I (it probably doesn't exist). ................................................. ................................................. . fontspec info: "defining-font" . . Font family 'BZar(0)' created for font 'B Zar' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,Scale=1.3]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->s*[1.3]"B Zar/OT:script=arab;language=DFLT;mapping=parsidigits;" . . * 'small caps' with NFSS spec.: . . and font adjustment code: . . . * 'bold' with NFSS spec.: . <->s*[1.3]"B Zar/B/OT:script=arab;language=DFLT;mapping=parsidigits;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . . . * 'bold italic' with NFSS spec.: . <->s*[1.3]"B Zar/BI/OT:script=arab;language=DFLT;mapping=parsidigits;" . . * 'bold small caps' with NFSS spec.: . . and font adjustment code: . ................................................. LaTeX Info: Redefining \persianfont on input line 33. LaTeX Font Info: Font shape `EU1/BZar(0)/m/n' will be (Font) scaled to size 13.00003pt on input line 33. LaTeX Warning: Unused global option(s): [14pt]. No file M_A.aux. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for PD1/pdf/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for PU/pdf/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for EU1/lmr/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for T3/cmr/m/n on input line 49. LaTeX Font Info: Try loading font information for T3+cmr on input line 49. ("C:\Program Files\MiKTeX 2.9\tex\latex\tipa\t3cmr.fd" File: t3cmr.fd 2001/12/31 TIPA font definitions ) LaTeX Font Info: ... okay on input line 49. \AtBeginShipoutBox=\box72 Package hyperref Info: Link coloring OFF on input line 49. ("C:\Program Files\MiKTeX 2.9\tex\latex\hyperref\nameref.sty" Package: nameref 2012/10/27 v2.43 Cross-referencing by name of section ("C:\Program Files\MiKTeX 2.9\tex\generic\oberdiek\gettitlestring.sty" Package: gettitlestring 2010/12/03 v1.4 Cleanup title references (HO) ) \c@section@level=\count278 ) LaTeX Info: Redefining \ref on input line 49. LaTeX Info: Redefining \pageref on input line 49. LaTeX Info: Redefining \nameref on input line 49. \@outlinefile=\write4 Package hyperref Warning: Rerun to get /PageLabels entry. *geometry* detected driver: pdftex *geometry* verbose mode - [ preamble ] result: * driver: pdftex * paper: a4paper * layout: * layoutoffset:(h,v)=(0.0pt,0.0pt) * modes: * h-part:(L,W,R)=(85.35826pt, 398.3386pt, 113.81102pt) * v-part:(T,H,B)=(85.35826pt, 674.33032pt, 85.35826pt) * \paperwidth=597.50787pt * \paperheight=845.04684pt * \textwidth=398.3386pt * \textheight=674.33032pt * \oddsidemargin=13.08827pt * \evensidemargin=13.08827pt * \topmargin=-23.91173pt * \headheight=12.0pt * \headsep=25.0pt * \topskip=10.0pt * \footskip=30.0pt * \marginparwidth=57.0pt * \marginparsep=11.0pt * \columnsep=10.0pt * \skip\footins=9.0pt plus 4.0pt minus 2.0pt * \hoffset=0.0pt * \voffset=0.0pt * \mag=1000 * \@twocolumnfalse * \@twosidefalse * \@mparswitchfalse * \@reversemarginfalse * (1in=72.27pt=25.4mm, 1cm=28.453pt) ! LaTeX Error: File `hhh' not found. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.54 \includegraphics{hhh} I could not locate the file with any of these extensions: .pdf,.PDF,.eps,.EPS,.ps,.PS,.png,.PNG,.jpg,.JPG,.jpeg,.JPEG,.bmp,.BMP,.pict,.PI CT,.psd,.PSD,.mac,.MAC,.TGA,.tga,.gif,.GIF,.tif,.TIF,.tiff,.TIFF, Try typing to proceed. If that doesn't work, type X to quit. ("C:\Program Files\MiKTeX 2.9\tex\generic\oberdiek\se-ascii-print.def" File: se-ascii-print.def 2011/12/02 v1.10 stringenc: Printable ASCII characters ) [1 ] ! LaTeX Error: File `hq' not found. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.59 \centerline{\includegraphics[width=2cm]{hq}} I could not locate the file with any of these extensions: .pdf,.PDF,.eps,.EPS,.ps,.PS,.png,.PNG,.jpg,.JPG,.jpeg,.JPEG,.bmp,.BMP,.pict,.PI CT,.psd,.PSD,.mac,.MAC,.TGA,.tga,.gif,.GIF,.tif,.TIF,.tiff,.TIFF, Try typing to proceed. If that doesn't work, type X to quit. LaTeX Font Info: Font shape `EU1/BZar(0)/m/n' will be (Font) scaled to size 18.72003pt on input line 74. LaTeX Font Info: Font shape `EU1/BZar(0)/bx/n' will be (Font) scaled to size 18.72003pt on input line 83. LaTeX Font Info: Try loading font information for U+msa on input line 83. ("C:\Program Files\MiKTeX 2.9\tex\latex\amsfonts\umsa.fd" File: umsa.fd 2013/01/14 v3.01 AMS symbols A ) LaTeX Font Info: Try loading font information for U+msb on input line 83. ("C:\Program Files\MiKTeX 2.9\tex\latex\amsfonts\umsb.fd" File: umsb.fd 2013/01/14 v3.01 AMS symbols B ) LaTeX Font Info: Try loading font information for U+rsfs on input line 83. ("C:\Program Files\MiKTeX 2.9\tex\latex\jknappen\ursfs.fd" File: ursfs.fd 1998/03/24 rsfs font definition file (jk) ) LaTeX Font Info: Font shape `EU1/BZar(0)/m/n' will be (Font) scaled to size 15.60004pt on input line 85. [2] LaTeX Font Info: Font shape `EU1/BZar(0)/bx/n' will be (Font) scaled to size 13.00003pt on input line 97. ! Missing number, treated as zero. \relax l.108 \newpage A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) LaTeX Font Info: Font shape `EU1/BZar(0)/m/n' will be (Font) scaled to size 11.70003pt on input line 108. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\c@page' on input line 108. Package hyperref Warning: Token not allowed in a PDF string (PDFDocEncoding): (hyperref) removing `\c@page' on input line 108. [1] LaTeX Font Info: Font shape `EU1/BZar(0)/bx/n' will be (Font) scaled to size 15.60004pt on input line 109. ! Missing number, treated as zero. \relax l.117 \newpage A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\c@page' on input line 117. Package hyperref Warning: Token not allowed in a PDF string (PDFDocEncoding): (hyperref) removing `\c@page' on input line 117. [1] LaTeX Font Warning: Font shape `EU1/BZar(0)/m/it' undefined (Font) using `EU1/BZar(0)/m/n' instead on input line 128. [1] LaTeX Font Info: Font shape `EU1/BZar(0)/m/n' will be (Font) scaled to size 26.96207pt on input line 186. LaTeX Font Info: Font shape `EU1/BZar(0)/bx/n' will be (Font) scaled to size 26.96207pt on input line 186. No file M_A.toc. \tf@toc=\write5 [2] LaTeX Font Info: Font shape `EU1/BZar(0)/m/n' will be (Font) scaled to size 32.34407pt on input line 187. LaTeX Font Info: Font shape `EU1/BZar(0)/bx/n' will be (Font) scaled to size 32.34407pt on input line 187. No file M_A.lof. \tf@lof=\write6 [3 ] No file M_A.lot. \tf@lot=\write7 [4 ] فصل 1. [1 ] فصل 2. LaTeX Warning: Reference `b3' on page 2 undefined on input line 248. [2 ] Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! [3] Missing character: There is no j in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! [4] Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! [5] Missing character: There is no ρ in font cmmi10! Missing character: There is no φ in font cmmi10! Missing character: There is no θ in font cmmi10! Missing character: There is no φ in font cmmi10! Missing character: There is no ρ in font cmmi10! Missing character: There is no θ in font cmmi10! Missing character: There is no ρ in font cmmi10! Missing character: There is no θ in font cmmi10! Missing character: There is no ­ in font B Zar/OT:script=arab;language=DFLT;map ping=parsidigits;! ! Undefined control sequence. l.397 V=2\piRdS _{\varphi} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [6] Overfull \hbox (10.1197pt too wide) in alignment at lines 443--445 [][][] [] [] ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ! Missing } inserted. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} I've put in what seems to be necessary to fix the current column of the current alignment. Try to go on, since this might almost work. ! Extra }, or forgotten \endgroup. } l.452 ...phi 0}^{2}-B_{\varphi }^{2})dS_{\varphi}} (That makes 100 errors; please try again.) Here is how much of TeX's memory you used: 24341 strings out of 428791 436770 string characters out of 3164829 537067 words of memory out of 3000000 27291 multiletter control sequences out of 15000+200000 13515 words of font info for 113 fonts, out of 3000000 for 9000 1096 hyphenation exceptions out of 8191 43i,26n,60p,10416b,379s stack positions out of 5000i,500n,10000p,200000b,50000s Output written on M_A.pdf (14 pages).