This is XeTeX, Version 3.1415926-2.5-0.9999.3 (MiKTeX 2.9 64-bit) (preloaded format=xelatex 2015.4.20) 22 APR 2015 13:22 entering extended mode **texmaker.tex (C:\Users\hadis\Desktop\texmaker.tex LaTeX2e <2011/06/27> Babel and hyphenation patterns for loaded. ("C:\Program Files\MiKTeX 2.9.510\tex\latex\base\article.cls" Document Class: article 2007/10/19 v1.4h Standard LaTeX document class ("C:\Program Files\MiKTeX 2.9.510\tex\latex\base\size10.clo" File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count80 \c@section=\count81 \c@subsection=\count82 \c@subsubsection=\count83 \c@paragraph=\count84 \c@subparagraph=\count85 \c@figure=\count86 \c@table=\count87 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\xepersian.sty" Package: xepersian 2015/02/02 v16 Persian typesetting in XeLaTeX ("C:\Program Files\MiKTeX 2.9.510\tex\latex\fontspec\fontspec.sty" Package: fontspec 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLaTeX ("C:\Program Files\MiKTeX 2.9.510\tex\latex\l3kernel\expl3.sty" Package: expl3 2015/03/01 v5547 L3 programming layer (loader) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\l3kernel\expl3-code.tex" Package: expl3 2015/03/01 v5547 L3 programming layer (code) L3 Module: l3bootstrap 2015/02/28 v5542 L3 Bootstrap code ("C:\Program Files\MiKTeX 2.9.510\tex\latex\misc\etex.sty" Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB) \et@xins=\count88 ) L3 Module: l3names 2015/02/24 v5535 L3 Namespace for primitives L3 Module: l3basics 2015/01/27 v5500 L3 Basic definitions L3 Module: l3expan 2014/11/27 v5472 L3 Argument expansion L3 Module: l3tl 2015/01/27 v5500 L3 Token lists L3 Module: l3str 2015/03/01 v5545 L3 Strings L3 Module: l3seq 2014/08/23 v5354 L3 Sequences and stacks L3 Module: l3int 2015/02/21 v5529 L3 Integers \c_max_int=\count89 \l_tmpa_int=\count90 \l_tmpb_int=\count91 \g_tmpa_int=\count92 \g_tmpb_int=\count93 L3 Module: l3quark 2014/08/23 v5354 L3 Quarks L3 Module: l3prg 2014/08/23 v5354 L3 Control structures \g__prg_map_int=\count94 L3 Module: l3clist 2014/08/23 v5354 L3 Comma separated lists L3 Module: l3token 2014/09/15 v5422 L3 Experimental token manipulation L3 Module: l3prop 2014/08/23 v5354 L3 Property lists L3 Module: l3msg 2015/02/26 v5537 L3 Messages L3 Module: l3file 2014/08/24 v5369 L3 File and I/O operations \l_iow_line_count_int=\count95 \l__iow_target_count_int=\count96 \l__iow_current_line_int=\count97 \l__iow_current_word_int=\count98 \l__iow_current_indentation_int=\count99 L3 Module: l3skip 2014/08/23 v5354 L3 Dimensions and skips \c_zero_dim=\dimen103 \c_max_dim=\dimen104 \l_tmpa_dim=\dimen105 \l_tmpb_dim=\dimen106 \g_tmpa_dim=\dimen107 \g_tmpb_dim=\dimen108 \c_zero_skip=\skip43 \c_max_skip=\skip44 \l_tmpa_skip=\skip45 \l_tmpb_skip=\skip46 \g_tmpa_skip=\skip47 \g_tmpb_skip=\skip48 \c_zero_muskip=\muskip10 \c_max_muskip=\muskip11 \l_tmpa_muskip=\muskip12 \l_tmpb_muskip=\muskip13 \g_tmpa_muskip=\muskip14 \g_tmpb_muskip=\muskip15 L3 Module: l3keys 2015/01/27 v5500 L3 Key-value interfaces \g__keyval_level_int=\count100 \l_keys_choice_int=\count101 L3 Module: l3fp 2014/08/22 v5336 L3 Floating points \c__fp_leading_shift_int=\count102 \c__fp_middle_shift_int=\count103 \c__fp_trailing_shift_int=\count104 \c__fp_big_leading_shift_int=\count105 \c__fp_big_middle_shift_int=\count106 \c__fp_big_trailing_shift_int=\count107 \c__fp_Bigg_leading_shift_int=\count108 \c__fp_Bigg_middle_shift_int=\count109 \c__fp_Bigg_trailing_shift_int=\count110 L3 Module: l3box 2014/08/23 v5354 L3 Experimental boxes \c_empty_box=\box26 \l_tmpa_box=\box27 \l_tmpb_box=\box28 \g_tmpa_box=\box29 \g_tmpb_box=\box30 L3 Module: l3coffins 2014/08/23 v5354 L3 Coffin code layer \l__coffin_internal_box=\box31 \l__coffin_internal_dim=\dimen109 \l__coffin_offset_x_dim=\dimen110 \l__coffin_offset_y_dim=\dimen111 \l__coffin_x_dim=\dimen112 \l__coffin_y_dim=\dimen113 \l__coffin_x_prime_dim=\dimen114 \l__coffin_y_prime_dim=\dimen115 \c_empty_coffin=\box32 \l__coffin_aligned_coffin=\box33 \l__coffin_aligned_internal_coffin=\box34 \l_tmpa_coffin=\box35 \l_tmpb_coffin=\box36 \l__coffin_display_coffin=\box37 \l__coffin_display_coord_coffin=\box38 \l__coffin_display_pole_coffin=\box39 \l__coffin_display_offset_dim=\dimen116 \l__coffin_display_x_dim=\dimen117 \l__coffin_display_y_dim=\dimen118 L3 Module: l3color 2014/08/23 v5354 L3 Experimental color support L3 Module: l3candidates 2015/03/01 v5544 L3 Experimental additions to l3kernel \l__box_top_dim=\dimen119 \l__box_bottom_dim=\dimen120 \l__box_left_dim=\dimen121 \l__box_right_dim=\dimen122 \l__box_top_new_dim=\dimen123 \l__box_bottom_new_dim=\dimen124 \l__box_left_new_dim=\dimen125 \l__box_right_new_dim=\dimen126 \l__box_internal_box=\box40 \l__coffin_bounding_shift_dim=\dimen127 \l__coffin_left_corner_dim=\dimen128 \l__coffin_right_corner_dim=\dimen129 \l__coffin_bottom_corner_dim=\dimen130 \l__coffin_top_corner_dim=\dimen131 \l__coffin_scaled_total_height_dim=\dimen132 \l__coffin_scaled_width_dim=\dimen133 ) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\l3kernel\l3unicode-data.def" File: l3unicode-data.def 2015/03/01 v5544 L3 Unicode data ) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\l3kernel\l3xdvipdfmx.def" File: l3xdvidpfmx.def 2015/03/01 v5544 L3 Experimental driver: xdvipdfmx )) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\l3packages\xparse\xparse.sty" Package: xparse 2014/11/25 v5471 L3 Experimental document command parser \l__xparse_current_arg_int=\count111 \l__xparse_m_args_int=\count112 \l__xparse_mandatory_args_int=\count113 \l__xparse_processor_int=\count114 \l__xparse_v_nesting_int=\count115 ) \l_fontspec_script_int=\count116 \l_fontspec_language_int=\count117 \l_fontspec_strnum_int=\count118 \l_fontspec_tmpa_dim=\dimen134 \l_fontspec_tmpb_dim=\dimen135 \l_fontspec_tmpc_dim=\dimen136 Variant \tl_gset:cV already defined; not changing it on line 69 ("C:\Program Files\MiKTeX 2.9.510\tex\latex\fontspec\fontspec-patches.sty" Package: fontspec-patches 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLa TeX ("C:\Program Files\MiKTeX 2.9.510\tex\latex\base\fixltx2e.sty" Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX LaTeX Info: Redefining \em on input line 420. ) LaTeX Info: Redefining \em on input line 22. LaTeX Info: Redefining \emph on input line 30. LaTeX Info: Redefining \- on input line 33. ................................................. . LaTeX info: "xparse/redefine-command" . . Redefining command \oldstylenums with sig. 'm' on line 128. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \liningnums with sig. 'm' on line 132. ................................................. ) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\fontspec\fontspec-xetex.sty" Package: fontspec-xetex 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLaTe X ("C:\Program Files\MiKTeX 2.9.510\tex\latex\base\fontenc.sty" Package: fontenc 2005/09/27 v1.99g Standard LaTeX package ("C:\Program Files\MiKTeX 2.9.510\tex\latex\euenc\eu1enc.def" File: eu1enc.def 2010/05/27 v0.1h Experimental Unicode font encodings ) LaTeX Font Info: Try loading font information for EU1+lmr on input line 100. ("C:\Program Files\MiKTeX 2.9.510\tex\latex\euenc\eu1lmr.fd" File: eu1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern )) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xunicode\xunicode.sty" File: xunicode.sty 2011/09/09 v0.981 provides access to latin accents and many other characters in Unicode lower plane ("C:\Program Files\MiKTeX 2.9.510\tex\latex\tipa\t3enc.def" File: t3enc.def 2001/12/31 T3 encoding LaTeX Font Info: Try loading font information for EU1+lmss on input line 357 . ("C:\Program Files\MiKTeX 2.9.510\tex\latex\euenc\eu1lmss.fd" File: eu1lmss.fd 2009/10/30 v1.6 Font defs for Latin Modern )) \tipaTiiicode=\count119 \tipasavetokens=\toks14 \tipachecktokens=\toks15 ("C:\Program Files\MiKTeX 2.9.510\tex\latex\graphics\graphicx.sty" Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\graphics\keyval.sty" Package: keyval 1999/03/16 v1.13 key=value parser (DPC) \KV@toks@=\toks16 ) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\graphics\graphics.sty" Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\graphics\trig.sty" Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\00miktex\graphics.cfg" File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive ) Package graphics Info: Driver file: xetex.def on input line 91. ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xetex-def\xetex.def" File: xetex.def 2014/07/25 v4.03 LaTeX color/graphics driver for XeTeX (RRM/JK) )) \Gin@req@height=\dimen137 \Gin@req@width=\dimen138 )) ................................................. . LaTeX info: "xparse/define-command" . . Defining command \fontspec with sig. 'O{}m' on line 41. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setmainfont with sig. 'O{}m' on line 46. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setsansfont with sig. 'O{}m' on line 51. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setmonofont with sig. 'O{}m' on line 56. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setmathrm with sig. 'O{}m' on line 65. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setboldmathrm with sig. 'O{}m' on line 69. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setmathsf with sig. 'O{}m' on line 73. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setmathtt with sig. 'O{}m' on line 77. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \newfontfamily with sig. 'mO{}m' on line 96. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \newfontface with sig. 'mO{}m' on line 100. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \defaultfontfeatures with sig. 'om' on line 108. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \addfontfeatures with sig. 'm' on line 144. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \newfontfeature with sig. 'mm' on line 156. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \newAATfeature with sig. 'mmmm' on line 164. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \newICUfeature with sig. 'mmm' on line 172. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \aliasfontfeature with sig. 'mm' on line 201. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \aliasfontfeatureoption with sig. 'mmm' on line 203. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \newfontscript with sig. 'mm' on line 208. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \newfontlanguage with sig. 'mm' on line 235. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \DeclareFontsExtensions with sig. 'm' on line 256. ................................................. Variant \prop_gput:cnV already defined; not changing it on line 582 Variant \prop_gput:cnx already defined; not changing it on line 583 \l_fontspec_tmp_int=\count120 LaTeX Info: Redefining \itshape on input line 2087. LaTeX Info: Redefining \slshape on input line 2092. LaTeX Info: Redefining \scshape on input line 2097. LaTeX Info: Redefining \upshape on input line 2102. ("C:\Program Files\MiKTeX 2.9.510\tex\latex\fontspec\fontspec.cfg"))) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\xepersian-persiancal.st y" Package: xepersian-persiancal 2012/07/25 v0.2 provides Persian calendar \XePersian@i=\count121 \XePersian@y=\count122 \XePersian@m=\count123 \XePersian@d=\count124 \XePersian@latini=\count125 \XePersian@persiani=\count126 \XePersian@latinii=\count127 \XePersian@persianii=\count128 \XePersian@latiniii=\count129 \XePersian@persianiii=\count130 \XePersian@latiniv=\count131 \XePersian@persianiv=\count132 \XePersian@latinv=\count133 \XePersian@persianv=\count134 \XePersian@latinvi=\count135 \XePersian@persianvi=\count136 \XePersian@latinvii=\count137 \XePersian@persianvii=\count138 \XePersian@latinviii=\count139 \XePersian@persianviii=\count140 \XePersian@latinix=\count141 \XePersian@persianix=\count142 \XePersian@latinx=\count143 \XePersian@persianx=\count144 \XePersian@latinxi=\count145 \XePersian@persianxi=\count146 \XePersian@latinxii=\count147 \XePersian@persianxii=\count148 \XePersian@persianxiii=\count149 \XePersian@temp=\count150 \XePersian@temptwo=\count151 \XePersian@tempthree=\count152 \XePersian@yModHundred=\count153 \XePersian@thirtytwo=\count154 \XePersian@dn=\count155 \XePersian@sn=\count156 \XePersian@mminusone=\count157 ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\xepersian-mathsdigitspe c.sty" Package: xepersian-mathsdigitspec 2014/11/21 v1.1.0 Unicode Persian maths digit s in XeLaTeX ................................................. . LaTeX info: "xparse/define-command" . . Defining command \new@mathbf with sig. 'm' on line 132. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \new@mathit with sig. 'm' on line 140. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \new@mathrm with sig. 'm' on line 148. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \new@mathsf with sig. 'm' on line 156. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \new@mathtt with sig. 'm' on line 164. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setdigitfont with sig. 'O{}mO{}' on line 189. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setmathsfdigitfont with sig. 'O{}mO{}' on line 195. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setmathttdigitfont with sig. 'O{}mO{}' on line 201. ................................................. ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\bidi\bidi.sty" Package: bidi 2013/11/16 v14.4 Bidirectional typesetting in plain TeX and LaTeX **************************************************** * * bidi package (Bidirectional typesetting in * plain TeX and LaTeX, using XeTeX engine) * * Description: A convenient interface for * typesetting bidirectional texts in plain TeX * and LaTeX. The package includes adaptations * for use with many other commonly-used packages. * * Copyright © 2009–2013 Vafa Khalighi * * 2013/11/16, v14.4 * * License: LaTeX Project Public License, version * 1.3c or higher (your choice) * * Location on CTAN: /macros/xetex/latex/bidi * * Issue tracker: https://github.com/vafa/bidi/issues * * Support: persian-tex@tug.org **************************************************** ("C:\Program Files\MiKTeX 2.9.510\tex\latex\iftex\iftex.sty" Package: iftex 2013/04/04 v0.2 Provides if(tex) conditional for PDFTeX, XeTeX, and LuaTeX ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\bidi\biditools.sty" Package: biditools 2013/04/10 v0.2 Programming tools for bidi package ) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\oberdiek\zref-abspage.sty" Package: zref-abspage 2012/04/04 v2.24 Module abspage for zref (HO) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\oberdiek\zref-base.sty" Package: zref-base 2012/04/04 v2.24 Module base for zref (HO) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\ltxcmds.sty" Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO) ) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\infwarerr.sty" Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO) ) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\kvsetkeys.sty" Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\etexcmds.sty" Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\ifluatex.sty" Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX not detected. ) Package etexcmds Info: Could not find \expanded. (etexcmds) That can mean that you are not using pdfTeX 1.50 or (etexcmds) that some package has redefined \expanded. (etexcmds) In the latter case, load this package earlier. )) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\kvdefinekeys.sty" Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO) ) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\pdftexcmds.sty" Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO ) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\ifpdf.sty" Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in PDF mode is not detected. ) Package pdftexcmds Info: LuaTeX not detected. Package pdftexcmds Info: pdfTeX >= 1.30 not detected. Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. Package pdftexcmds Info: \pdfdraftmode not found. ) ("C:\Program Files\MiKTeX 2.9.510\tex\latex\oberdiek\auxhook.sty" Package: auxhook 2011/03/04 v1.3 Hooks for auxiliary files (HO) ) Package zref Info: New property list: main on input line 759. Package zref Info: New property: default on input line 760. Package zref Info: New property: page on input line 761. ) ("C:\Program Files\MiKTeX 2.9.510\tex\generic\oberdiek\atbegshi.sty" Package: atbegshi 2011/10/05 v1.16 At begin shipout hook (HO) ) \c@abspage=\count158 Package zref Info: New property: abspage on input line 62. ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\bidi\latex-xetex-bidi.def" File: latex-xetex-bidi.def 2013/10/10 v1.1.5 bidi adaptations for `latex.ltx' f or XeTeX engine \bidi@n@everypar=\toks17 ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\bidi\footnote-xetex-bidi.def" File: footnote-xetex-bidi.def 2013/04/26 v0.8 bidi footnote macros for XeTeX en gine \c@footdir@label=\count159 \footdir@toks=\toks18 ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\bidi\article-xetex-bidi.def" File: article-xetex-bidi.def 2010/07/25 v0.4 bidi adaptations for standard arti cle class for XeTeX engine ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\bidi\graphicx-xetex-bidi.def" File: graphicx-xetex-bidi.def 2012/01/01 v0.4 bidi adaptations for graphicx pac kage for XeTeX engine )) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\bidi\loadingorder-xetex-bidi.def" File: loadingorder-xetex-bidi.def 2013/05/22 v0.95 making sure that bidi is the last package loaded )) **************************************************** * * xepersian package (Persian for LaTeX, using XeTeX engine) * * Description: The package supports Persian * typesetting, using fonts provided in the * distribution. * * Copyright (c) 2008--2015 Vafa Khalighi * * v16, 2015/02/02 * * License: LaTeX Project Public License, version * 1.3c or higher (your choice) * * Location on CTAN: /macros/xetex/latex/xepersian * * Issue tracker: https://github.com/persian-tex/xepersian/issues * * Support: persian-tex@tug.org **************************************************** ................................................. . LaTeX info: "xparse/define-command" . . Defining command \settextfont with sig. 'O{}mO{}' on line 113. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setlatintextfont with sig. 'O{}mO{}' on line 125. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \defpersianfont with sig. 'mO{}mO{}' on line 139. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \deflatinfont with sig. 'mO{}mO{}' on line 151. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setpersiansansfont with sig. 'O{}mO{}' on line 187. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setpersianmonofont with sig. 'O{}mO{}' on line 193. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setnavarfont with sig. 'O{}mO{}' on line 199. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setpookfont with sig. 'O{}mO{}' on line 205. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setsayehfont with sig. 'O{}mO{}' on line 211. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining command \setiranicfont with sig. 'O{}mO{}' on line 217. ................................................. ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\loadingorder-xepersian. def" File: loadingorder-xepersian.def 2012/01/01 v0.3 making sure that xepersian is the last package loaded ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\fontspec-xetex-xepersia n.def" File: fontspec-xetex-xepersian.def 2014/07/10 v0.1 fixes for fontspec-xetex pac kage ................................................. . LaTeX info: "xparse/redefine-command" . . Redefining command \aliasfontfeature with sig. 'mm' on line 73. ................................................. ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\footnote-xepersian.def" File: footnote-xepersian.def 2013/04/26 v0.4 footnote macros for xepersian pack age ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\article-xepersian.def " File: article-xepersian.def 2010/07/25 v0.2 adaptations for standard article cl ass ) ! Undefined control sequence. l.657 \define@choicekey {xepersian.sty}{mathdigits}[\xepersian@tempa\xepersia... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.657 \define@choicekey{x epersian.sty}{mathdigits}[\xepersian@tempa\xepersia... You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.657 ...persian.sty}{mathdigits}[\xepersian@tempa \xepersian@tempb]{automati... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.657 ...hdigits}[\xepersian@tempa\xepersian@tempb ]{automatic,default,persia... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.658 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.658 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.665 \define@choicekey {xepersian.sty}{RTLdocument}[\xepersian@tempa\xepersi... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.665 ...ersian.sty}{RTLdocument}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.665 ...ocument}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.666 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.666 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.671 \define@choicekey {xepersian.sty}{rldocument}[\xepersian@tempa\xepersia... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.671 ...persian.sty}{rldocument}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.671 ...ocument}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.672 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.672 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.677 \define@choicekey {xepersian.sty}{footnoterule}[\xepersian@tempa\xepers... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.677 ...rsian.sty}{footnoterule}[\xepersian@tempa \xepersian@tempb]{automati... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.677 ...oterule}[\xepersian@tempa\xepersian@tempb ]{automatic,left,right,spl... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.678 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.678 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.689 \define@choicekey {xepersian.sty}{footnotedirection}[\xepersian@tempa\x... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.689 ....sty}{footnotedirection}[\xepersian@tempa \xepersian@tempb]{righttol... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.689 ...rection}[\xepersian@tempa\xepersian@tempb ]{righttoleft,lefttoright}{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.690 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.690 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.695 \define@choicekey {xepersian.sty}{debugfootnotedirection}[\xepersian@te... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.695 ...{debugfootnotedirection}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.695 ...rection}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.696 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.696 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.701 \define@choicekey {xepersian.sty}{Kashida}[\xepersian@tempa\xepersian@t... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.701 ...{xepersian.sty}{Kashida}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.701 ...Kashida}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.702 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.702 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\kashida-xepersian.def" File: kashida-xepersian.def 2013/11/15 v0.3 implementation of Kashida for xeper sian package Overfull \hbox (57.98001pt too wide) in paragraph at lines 657--39 []\EU1/lmr/m/n/10 xepersian.stymathdigits[]automatic,default,persian xepersian. styRTLdocument[]on,off[on] [] Overfull \hbox (75.78001pt too wide) in paragraph at lines 657--39 \EU1/lmr/m/n/10 xepersian.styrldocument[]on,off[on] xepersian.styfootnoterule[] automatic,left,right,split,textwidth [] Overfull \hbox (87.99pt too wide) in paragraph at lines 657--39 \EU1/lmr/m/n/10 xepersian.styfootnotedirection[]righttoleft,lefttoright xepersi an.stydebugfootnotedirection[]on,off[on] [] ) ! Undefined control sequence. l.705 \define@choicekey {xepersian.sty}{localise}[\xepersian@tempa\xepersian@... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.705 \define@choicekey{x epersian.sty}{localise}[\xepersian@tempa\xepersian@... You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.705 ...xepersian.sty}{localise}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.705 ...ocalise}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.706 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.706 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\localise-xepersian.def" File: localise-xepersian.def 2014/07/10 v0.2b Persian localisation of LaTeX2e ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\latex-localise-commands -xepersian.def" File: latex-localise-commands-xepersian.def 2014/02/05 v0.3 Persian localisatio n of LaTeX2e commands ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\xepersian-localise-comm ands-xepersian.def" File: xepersian-localise-commands-xepersian.def 2012/07/25 v0.2 Persian localis ation of XePersian commands ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\latex-localise-environm ents-xepersian.def" File: latex-localise-environments-xepersian.def 2010/07/25 v0.2 Persian localis ation of LaTeX2e environments ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\xepersian-localise-envi ronments-xepersian.def" File: xepersian-localise-environments-xepersian.def 2010/07/25 v0.1 Persian loc alisation of XePersian and bidi environments ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\latex-localise-messages -xepersian.def" File: latex-localise-messages-xepersian.def 2011/03/01 v0.1 localising LaTeX2e messages ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\latex-localise-misc-xep ersian.def" File: latex-localise-misc-xepersian.def 2012/01/01 v0.2 miscellaneous Persian l ocalisation of LaTeX2e Overfull \hbox (2177.28131pt too wide) in paragraph at lines 705--49 []\EU1/lmr/m/n/10 xepersian.stylocalise[]on,off[on] [] ) ("C:\Program Files\MiKTeX 2.9.510\tex\xelatex\xepersian\packages-localise-xeper sian.def" File: packages-localise-xepersian.def 2013/04/24 v0.2 localising LaTeX2e Packag es )) ! Undefined control sequence. l.709 \define@choicekey {xepersian.sty}{extrafootnotefeatures}[\xepersian@tem... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.709 \define@choicekey{x epersian.sty}{extrafootnotefeatures}[\xepersian@tem... You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.709 ...}{extrafootnotefeatures}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.709 ...eatures}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.710 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.710 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.715 \define@choicekey {xepersian.sty}{quickindex}[\xepersian@tempa\xepersia... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.715 ...persian.sty}{quickindex}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.715 ...ckindex}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.716 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.716 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) Package xepersian Warning: Obsolete option on input line 717. ! LaTeX Error: \printindex undefined. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.723 \@input@{\jobname.ind}}} % Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.728 \define@choicekey {xepersian.sty}{quickindex-variant1}[\xepersian@tempa... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.728 ...ty}{quickindex-variant1}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.728 ...ariant1}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.729 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.729 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! LaTeX Error: \printindex undefined. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.735 \@input@{\jobname.ind}}} % Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.740 \define@choicekey {xepersian.sty}{quickindex-variant2}[\xepersian@tempa... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.740 ...ty}{quickindex-variant2}[\xepersian@tempa \xepersian@tempb]{on,off}[... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.740 ...ariant2}[\xepersian@tempa\xepersian@tempb ]{on,off}[on]{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.741 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.741 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! LaTeX Error: \printindex undefined. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.747 \@input@{\jobname.ind}}} % Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.752 \define@choicekey {xepersian.sty}{abjadvariant}[\xepersian@tempa\xepers... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.752 ...rsian.sty}{abjadvariant}[\xepersian@tempa \xepersian@tempb]{one,two}{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.752 ...variant}[\xepersian@tempa\xepersian@tempb ]{one,two}{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.753 \ifcase\xepersian@tempb \relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \relax l.753 \ifcase\xepersian@tempb\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. l.764 \DeclareOptionX {defaultlatinfontfeatures}{% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. ...t:N \l__fontspec_tmp_tl {\latinfont }} l.767 {#1} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Overfull \hbox (16.84pt too wide) in paragraph at lines 709--769 []\EU1/lmr/m/n/10 xepersian.styextrafootnotefeatures[]on,off[on] xepersian.styq uickindex[]on,off[on] [] Overfull \hbox (33.73999pt too wide) in paragraph at lines 709--769 \EU1/lmr/m/n/10 xepersian.styquickindex-variant1[]on,off[on] xepersian.styquick index-variant2[]on,off[on] [] ! Undefined control sequence. l.770 \ExecuteOptionsX {% The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.771 R TLdocument=on, You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.777 \ProcessOptionsX The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \setlatintextfont code ...fontspec_set_family:cnn {g__fontspec_\cs_to_str:N ... l.785 \PersianAlphs The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.785 \PersianAlphs You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. \PersianAlphs l.785 \PersianAlphs The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ) ! Undefined control sequence. \settextfont code ...#3->\fontspec_set_family:cnn {g__fontspec_\cs_to_str:N ... l.3 \settextfont{B Nazanin+ Regular} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \familydefault ->\rmdefault l.3 \settextfont{B Nazanin+ Regular} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Try loading font information for EU1+ on input line 3. LaTeX Font Info: No file EU1.fd. on input line 3. LaTeX Font Warning: Font shape `EU1//m/n' undefined (Font) using `EU1/lmr/m/n' instead on input line 3. No file texmaker.aux. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 4. LaTeX Font Info: ... okay on input line 4. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 4. LaTeX Font Info: ... okay on input line 4. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 4. LaTeX Font Info: ... okay on input line 4. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 4. LaTeX Font Info: ... okay on input line 4. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 4. LaTeX Font Info: ... okay on input line 4. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 4. LaTeX Font Info: ... okay on input line 4. LaTeX Font Info: Checking defaults for EU1/lmr/m/n on input line 4. LaTeX Font Info: ... okay on input line 4. LaTeX Font Info: Checking defaults for T3/cmr/m/n on input line 4. LaTeX Font Info: Try loading font information for T3+cmr on input line 4. ("C:\Program Files\MiKTeX 2.9.510\tex\latex\tipa\t3cmr.fd" File: t3cmr.fd 2001/12/31 TIPA font definitions ) LaTeX Font Info: ... okay on input line 4. ! Undefined control sequence. \familydefault ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ................................................. . fontspec info: "setup-math" . . Adjusting the maths setup (use [no-math] to avoid this). ................................................. \symlegacymaths=\mathgroup4 LaTeX Font Info: Overwriting symbol font `legacymaths' in version `bold' (Font) OT1/cmr/m/n --> OT1/cmr/bx/n on input line 4. LaTeX Font Info: Redeclaring math accent \acute on input line 4. LaTeX Font Info: Redeclaring math accent \grave on input line 4. LaTeX Font Info: Redeclaring math accent \ddot on input line 4. LaTeX Font Info: Redeclaring math accent \tilde on input line 4. LaTeX Font Info: Redeclaring math accent \bar on input line 4. LaTeX Font Info: Redeclaring math accent \breve on input line 4. LaTeX Font Info: Redeclaring math accent \check on input line 4. LaTeX Font Info: Redeclaring math accent \hat on input line 4. LaTeX Font Info: Redeclaring math accent \dot on input line 4. LaTeX Font Info: Redeclaring math accent \mathring on input line 4. LaTeX Font Info: Redeclaring math symbol \colon on input line 4. LaTeX Font Info: Redeclaring math symbol \Gamma on input line 4. LaTeX Font Info: Redeclaring math symbol \Delta on input line 4. LaTeX Font Info: Redeclaring math symbol \Theta on input line 4. LaTeX Font Info: Redeclaring math symbol \Lambda on input line 4. LaTeX Font Info: Redeclaring math symbol \Xi on input line 4. LaTeX Font Info: Redeclaring math symbol \Pi on input line 4. LaTeX Font Info: Redeclaring math symbol \Sigma on input line 4. LaTeX Font Info: Redeclaring math symbol \Upsilon on input line 4. LaTeX Font Info: Redeclaring math symbol \Phi on input line 4. LaTeX Font Info: Redeclaring math symbol \Psi on input line 4. LaTeX Font Info: Redeclaring math symbol \Omega on input line 4. LaTeX Font Info: Redeclaring math symbol \mathdollar on input line 4. LaTeX Font Info: Redeclaring symbol font `operators' on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Encoding `OT1' has changed to `EU1' for symbol font (Font) `operators' in the math version `normal' on input line 4. LaTeX Font Info: Overwriting symbol font `operators' in version `normal' (Font) OT1/cmr/m/n --> EU1//m/n on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Encoding `OT1' has changed to `EU1' for symbol font (Font) `operators' in the math version `bold' on input line 4. LaTeX Font Info: Overwriting symbol font `operators' in version `bold' (Font) OT1/cmr/bx/n --> EU1//m/n on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Overwriting symbol font `operators' in version `normal' (Font) EU1//m/n --> EU1//m/n on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Overwriting math alphabet `\mathrm' in version `normal' (Font) EU1//m/n --> EU1//m/n on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal' (Font) OT1/cmr/m/it --> EU1//m/it on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal' (Font) OT1/cmr/bx/n --> EU1//bx/n on input line 4. LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `normal' (Font) OT1/cmss/m/n --> EU1/lmss/m/n on input line 4. LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `normal' (Font) OT1/cmtt/m/n --> EU1/lmtt/m/n on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Overwriting symbol font `operators' in version `bold' (Font) EU1//m/n --> EU1//bx/n on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Overwriting math alphabet `\mathrm' in version `bold' (Font) EU1//m/n --> EU1//bx/n on input line 4. ! Undefined control sequence. \g_fontspec_mathrm_tl ->\rmdefault l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold' (Font) OT1/cmr/bx/it --> EU1//bx/it on input line 4. LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `bold' (Font) OT1/cmss/bx/n --> EU1/lmss/bx/n on input line 4. LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `bold' (Font) OT1/cmtt/m/n --> EU1/lmtt/bx/n on input line 4. \AtBeginShipoutBox=\box41 ! Undefined control sequence. \@begindocumenthook ...n_localize_patch_verbatim: l.4 \begin{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no س in font [lmroman10-regular]:mapping=tex-text! Missing character: There is no ل in font [lmroman10-regular]:mapping=tex-text! Missing character: There is no ا in font [lmroman10-regular]:mapping=tex-text! Missing character: There is no م in font [lmroman10-regular]:mapping=tex-text! Overfull \hbox (67.97pt too wide) in paragraph at lines 785--6 []\EU1//m/n/10 g__fontspec_latinfont_familyMapping=tex-text,ExternalLocation,Bo ldFont=lmroman10- [] Overfull \hbox (115.26999pt too wide) in paragraph at lines 785--6 \EU1//m/n/10 bold,BoldItalicFont=lmroman10-bolditalic,ItalicFont=lmroman10-ital ic,SmallCapsFont=lmromancaps10- [] Overfull \hbox (8.82pt too wide) in paragraph at lines 785--6 \EU1//m/n/10 regular,SlantedFont=lmromanslant10-regular,BoldSlantedFont=lmroman slant10- [] Overfull \hbox (145.65999pt too wide) in paragraph at lines 785--6 \EU1//m/n/10 bold,lmroman10-regular g__fontspec_persianfont_familyScript=Parsi, Language=Parsi,Mapping=parsidigits„B [] Overfull \hbox (56.90016pt too wide) in paragraph at lines 785--6 \EU1//m/n/10 Nazanin+ Regular سلام [] ! Undefined control sequence. \familydefault ->\rmdefault l.6 \end{document} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing \endcsname inserted. \g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Extra \endcsname. \font@name ..._latinfont_family /m/n/10\endcsname l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Extra endcsname. define@newfont ...csname curr@fontshape endcsname relax wrong@fontshape else... l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Extra endcsname. wrong@fontshape ...sname curr@fontshape endcsname relax let f@series default... l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Extra endcsname. wrong@fontshape ...sname curr@fontshape endcsname relax let f@family default... l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. LaTeX Font Warning: Font shape `EU1/g__fontspec_latinfont_family /m/nendcsname ' undefined (Font) using `EU1/lmr/m/n' instead on input line 6. ! Extra endcsname. reserved@a ...spec_latinfont_family /m/nendcsname l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. ! Extra \endcsname. \font@name ->\EU1/lmr/m/n/10 \endcsname l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. ! Missing \endcsname inserted. \g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Extra \endcsname. \font@name ..._latinfont_family /m/n/10\endcsname l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Extra endcsname. define@newfont ...csname curr@fontshape endcsname relax wrong@fontshape else... l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. ! Missing endcsname inserted. g__fontspec_latinfont_family l.6 \end{document} The control sequence marked should not appear between \csname and \endcsname. ! Corrupted NFSS tables. wrong@fontshape ...message {Corrupted NFSS tables} error@fontshape else let f... l.6 \end{document} This error message was generated by an \errmessage command, so I can't give any explicit help. Pretend that you're Hercule Poirot: Examine all clues, and deduce the truth by order and method. LaTeX Font Warning: Font shape `EU1/g__fontspec_latinfont_family /m/nendcsname ' undefined (Font) using `EU1/lmr/m/n' instead on input line 6. ! Extra endcsname. reserved@a ...spec_latinfont_family /m/nendcsname l.6 \end{document} I'm ignoring this, since I wasn't doing a \csname. [1 ] (C:\Users\hadis\Desktop\texmaker.aux) LaTeX Font Warning: Some font shapes were not available, defaults substituted. ) Here is how much of TeX's memory you used: 16184 strings out of 430466 321316 string characters out of 3191057 385712 words of memory out of 3000000 19224 multiletter control sequences out of 15000+200000 3680 words of font info for 19 fonts, out of 3000000 for 9000 14 hyphenation exceptions out of 8191 53i,4n,41p,10429b,1383s stack positions out of 5000i,500n,10000p,200000b,50000s Output written on texmaker.pdf (1 page).